WESCO-MRLOU-BRN - Wesco® - 10" Horsehide Pull-On "Mister Lou" Engineer Boot - Brown

[Ross]

@Joe_M ^

[brownr1]

@Davids_denim I know it's been a while since your post, but do you have any insight as to the fit of your Mr. Lou's? Like a comparison to Brannock, Vibergs, Lofgrens, etc?

[John Galt]

@brownr1 I personally have a Brannock size of 9.5D and wear a 9E in all of my Mr. Lou’s. However, I’ve seen others with similar Brannock size post they take a 9D. I could get away with a 9D in a leather that would readily stretch, but with the horse I personally need the little extra width. The difference in width between the D & E is technically to be only 3/16”, but in reality this dimension probably slightly differs with each pair during the stitchdown although all four of my pairs feel consistently close in width.

[brownr1]

@John-Galt good stuff, thanks.

[Ross]

RESTOCK

[steelworker]

Yowzah!

[Ross]

plugin-calendar-event-wrapper:start |||WESCO-MRLOU-BRN Restock|||

WESCO-MRLOU-BRN Restock

[[moment:time-date-view, utc, 1790953200000, 1790953500000, false]] UTC
See time in your time zone

WESCO-MRLOU-BRN Restock

[[calendar:response_no]] [[calendar:response_maybe]] [[calendar:response_yes]]

[[calendar:response_yes]] 1

[[calendar:response_maybe]] 0

[[calendar:response_no]] 0

plugin-calendar-event-wrapper:end

[Ross]

Model Rudi wears a size 11E

Chris wears a 10.5D
Sam D and Tyler wear a 8.5E
Freeman wears a 9E
Ben wears a 9.5E
Jack wears an 11E
Ross wears 11.5E

You can view the crew's vitals here

[Nick]

Crew's vitals here

[Ross]

RESTOCK