Repairs & Modifications
-
Just received this IHSH-300 from an international retailer. This constructional thread in the cuff is unraveling. Thinking it was a loose thread, I gave it a light tug and it began to unravel more. What's the best way to keep this from continuing? Snip at both ends?
@Chesson is a wizard with these things, but I’d consider getting in touch with the retailer.
-
Hi @Chad it's hard to tell from the photo you sent over but that could be constructional stitching if you keep pulling at it it may make things worse and snipping it may not stop it. Are you able to send over some more photo to give a better indication of which thread it is that is coming away?
-
By the looks of what I can work out from your photos that is likely to be an internal thread that has pulled through. If that is the case, doing a "factory" style repair would be very difficult as that stitch will have been run before the cuff is attached to the sleeve. Taking a look at the way out cuffs are constructed this looks overlocked internally but it also has a single row of stitching visible on the face of the fabric. If that row is still all intact you do not necessarily need to be concerned.
If you pull on the thread lightly is it still pulling out? or has it got to a stage where it has locked off?
-
I got one of these baseball cap buddies to wash my IHC-06. I put two zip ties on it so there is no possible way it can come open in the washer.
I put the cap inside out because there are areas that raise up past the cage that would rub in the washer. I already go a big crease on the side from the first time I washed it.
-
Ready for a new hole on my Faith belt, I decided to do something very drastic.
-
…no sooner than @steelworker mentioned on another thread to 'maintain your weight or things can get crazy' that I reached for my first 'non-denim' pants purchase IHDV-502-OLV, wore 'em to work and within a couple of hours I had to unbutton them, brutal. Unlike denim the material used for these is literally 'steel belted', especially the waist, I mean no give. Kinda bummed out because in every other aspect they fit great.
…when I got home from work I remembered I had one last pair of my old Levis still up in the closet and I also remembered someone (@Filthy?) had a do-able remedy. With a belt, no ones the wiser.
...this was the first generation 502 also. I Gorilla Glue duct taped it just to stop the thread unravel where I cut or made incision.
-
Hey @vaquero357 get yourself a spray bottle and one of these and you should be able to wet the waist and stretch them. Go slow because you might tear something or blow the button off if you don't. Also your do-dad looks about two inches so IDK if they will stretch that much. I'd say an inch to 1.5" tops.
This is the exact same one I bought and is definitely XHS stretch worthy.
PANT WAISTBAND STRETCHER - STRETCH RANGE 30" TO 51". FOR WAIST SIZE 30" TO 48". https://a.co/d/1xOLLGQ -
…I'll look into it, thanks brother!
-
…it is pretty hillbilly.
-
@Filthy:
I got one of these baseball cap buddies to wash my IHC-06. I put two zip ties on it so there is no possible way it can come open in the washer
I put the cap inside out because there are areas that raise up past the cage that would rub in the washer. I already go a big crease on the side from the first time I washed it.Genius! Thanks Mike!
-
Thought I'd share my "frayed crotch seams" procedure here. Some zig zagging with my trusty Singer Heavy Duty almost always does the job. Apparently, it can even handle 21OZ
This is the "fraying" I'm talking about. Seems to be caused by thighs rubbing against each other when walking.
Zig zagging along the frayed area. Crossing the point where all panels come together (what's the correct term for this?) is the critical part. How many layers of fabric there?
Happy with the results. Pro tip: Always use thread that is darker than the actual fabric to make the repair less visible. I used Gütermann Col 11 (100% Poly) in this case.
-
That looks really good @weftyarn
I have a regular Singer that I've used for small repairs on denim. But I don't dare using it on heavy weight IH (for fear of ruining my jeans–they're worth more than the Singer[emoji6]).
Might have to look into a heavy duty version of my own…
Verstuurd vanaf mijn SM-A217F met Tapatalk
-
-
pocket pouch repair
I just wonder how in the hell this is possible….pockets falling apart so soon, between 12-18mo's...
Wishing too that the pocket material was a little thicker.
634s 21oz bought August 2021. 2 washes.
Winter rotation and worn on and off.
Guess I´m just a lazy dude with too much time with my hands in my pockets.
