Giles and Paula's Great Retirement Adventure
-
Progress...
Antifouled, most anodes replaced, shaft anodes removed and generator saltwater strainer removed, so I can get the top off and Loctite the hose fitting properly)...
To do; get the top off the strainer, currently sitting in limescale remover, as I think the cap is sealed on with calcium build up. Polish the shafts (there are some benefits) and props, attach new shaft anodes, Lanolin the running gear. And a few other niggly little jobs here and there....Target date for refloat 2nd Dec, but may manage earlier if the weather continues to be kind.
-
did you ever have to go back and fix the radar thing on the roof?
-
@Giles filler for the radar wood cover (I think). some thing about the wood getting wet and we had to reapply to seal it off..
-
Oh yeah, we are talking about the same thing. I need to get up onto the roof when the weather is dry and sand down the excess filler. Not going to do that when the boat is out of the water, it's a longer way to fall before I hit something, and at least when the boat is in the water, there is 50% chance that I'll hit the wtaer.....
-
@Giles said in Giles and Paula's Great Retirement Adventure:
Birmingham screwdriver
You learn something new everyday… I was familiar with the Millwall brick, but this I had to google.
-
@Giles said in Giles and Paula's Great Retirement Adventure:
I come from Birmingham

And i had to google Millwall Brick.....
-
@Giles hitting the water is better than hitting the ground.
