Giles and Paula's Great Retirement Adventure
-
That's good. Plus the water temperature must help keep things cooler too.
-
I plan to take SAKURA down to The Med next May. I say I, because P does not want to do the long passages, and anyway she will miss Tiger.
I need crew. So if any of you would like a few days or a lot of days cruising adventure, let me know. I will not be able to be specific with dates until we are about to leave, because the weather will dictate when I do leave. So I need a pool of people, and hope that at least one of them can be with me when I leave. Dropping off/picking people en-route is part of the plan
Rough plan.
Gosport - Guernsey (for cheap diesel) - Brittany - Chanel du Four, Brest, Bay of Biscay (36 hours offshore), Galicia, coast of Portugal, Gibraltar (for cheap diesel), Ibiza (42 hours off shore)........
-
@Tago-Mago I’m going to do a leg with you and bringing extra oil just in case…
-
Looking sharp....
-
Gorgeous!
-
How often do you have to get it out of the water and do that kind of work?
-
Normally about once a year.
Jet wash to get the crud off, it is amazing what will grab onto and live on the hull and running gear
Wet and dry the rudders and rudder mounts, 5 coats of primer
2 coats of antifoul (paint) to hull and rudders
Wet and dry props and shafts, then coat them in lanolin
Remove and replace sacrificial anodesThis time I am also going to get the topsides (the part of the hull above the water line to the gunwhale) cut and polished. Salt and sun really mess with gelcoat, and once it loses its shine, crud can take hold very quickly
I also have a through hull fitting (the salt water intake for the generator) that is a bit dodge, and you cant fiddle around with one of those if it is in the water, because if it goes pear shaped, the boat will take on water very quickly. So I will dick around with it and if I screw it up, I can safely replace it without sinking the boat.
The shaft seals are also a tad dodgy, and you cant fiddle with them when the boat it in the water (because they also go through the hull below water level).



