IH-634S - 21oz Selvedge Denim Straight Cut Jeans - Indigo
-
Finally gave in and got a pair of 634s. First pair of IH denim. I now see what all the talk is about. What a great fit, great texture to the denim, strangely buttery soft to the touch! The next rabbit hole. I am interested to see how they age :). First if was UHF, then wabash, then shirts, 21oz sashiko,thermals, them type III jacket. Thats how it all begun……
-
-
Heyy, my first 634S and my first IronHeart ever! Really enjoy the tenderness yet strong of the fabric, also functional in cold weather. Love it!
-
This post is deleted!
-
Hi, I am new to the forum - I have been interested in getting a pair of 634s but the inseams currently seem to be around 34” and I think I would need at least a 36”. I have heard that different batches can come in different sizes, is this true?
-
The inseam will stay plus or minus a little bit from what it says in the sizing table.
If you want a longer inseam, then look at some of the other 634 variants:
https://www.ironheart.co.uk/bottoms/IH-634S-18.html
https://www.ironheart.co.uk/bottoms/ih-634n.html
https://www.ironheart.co.uk/bottoms/ih-634s-142.htmlIf, it is specifically the 21oz you are wanting, then look a some other cuts:
https://www.ironheart.co.uk/bottoms/ih-888s-21.html
etc etc etc
You will find more if you look around, but I don't know what you specific requirements are....
-
@Dick-Laurent one thing you may want to consider: are you looking at tag sizes or actual measurements? Take a minute and check out this video on how to measure a pair of denim that fits you and then compare those measurements to the sizing charts:
-
@eemmmiiee true waist is a poor metric to use when sizing. Measure a pair of jeans that fits you, using the IH measuring methods, then base your choice on that.
-
@eemmmiiee with the 21oz, very unlikely to get any noticeable lasting shrinkage. Easily stretches an inch in the waist. If you have a lot of pressure on the waist you could probably get an inch and half of stretch give or take. My 5 year old pair of 21oz waist is 1.5inches bigger than they were originally. I think anything over 1.5inches would be if you were actively/forcibly trying to stretch them.
But as many would say here, shrink and stretch isn't an exact science and everyone's adventure differs. I would plan sizing for about an inch of stretch in the waist. If you don't wear a belt, or have a belly like me exerting force on the waist, maybe plan for an inch and a half. And go off your best fitting jeans measured IH way rather than your true waist as @neph93 recommended
36 777S-21
36 777SST
35 634S-ib-c
XXXL IHSH-293-OD
XXXL IHSH-130-GB
XXXL IHSH-337 -
I guess my experience is a bit different. I own two pairs of 63421S and they measure just about the same in the waist as when I bought them. Mind you, I didn’t buy them with the expectation that they’d stretch out so they aren’t really under any kind of tension when I’m wearing them.
-
@Brandrea good point. All depends on if there is tension/force exerted on the waist
-
@eemmmiiee they will definitely tighten up in a wash, but they'll stretch back out to prewash in a day or so
-
@eemmmiiee you’re going to love them, me thinks.
I have 4 pair in the 634 cut. They’re my favourites
-
It is here! 3 days to Vancouver BC! Thank you @Graham
Measurements are spot on.
Abit snug on the waist but i know it will stretch out (my 888 stretched to to 35”)
Tag:33
Actual:
W: 16.5 x 2
FR: 10.8
RR: 15
TH: 12.9
KN: 9.3
HE: 8.8
IN: 34 -
I bought these 634S-21 at the beginning of 2024 while I was in Japan and just recently put them into rotation last month. I had them hemmed and thought I’d post a few pictures. Coming from 822 and 805, the front pockets took some getting used to, while also feeling “lite” in comparison. I like the hemmed look/feel so much that I took my 822 in to get hemmed. No more coming home with half the forest hiding in my cuffs.
-
