IH-888S-UHR - 21/23oz Ultra Heavy Raw Selvedge Denim High Rise Tapered Cut Jeans

[Oaktavia]

@Luijim78 said in IH-888S-UHR - 21/23oz Ultra Heavy Raw Selvedge Denim High Rise Tapered Cut Jeans:

@Oaktavia I live 15km from the Adriatic Sea and 30km from the Sibillini Mountains, once (up to 10 years ago) the 4 seasons were very distinct (hot summers but not excessively) and not too cold winters (rarely below zero but it snowed often if not always), now summer lasts 4/5 months and winters almost never go below 10 degrees , I love winter and for me it was really difficult to get used to this new climate

ah dang dude, I love winters too!

[Opa]

Hi guys,

just purchase these bad boys and have a few questions as it's my first UHR piece and quite anxious about losing my "shrink to fit" -virginity!

I know there's a lot of info and about as many tips as there are users on this matter, but just to be on the safe side I would appreciate some additional advice on the initial soak/wash process. I bought a tag size 38 and they are currently quite relaxed and loose on the top. I prefer to have them a bit more snug at least on the top parts. Is the "right" way to go if I put them inside out in a tub with warm (approx 30c) water for 1-2 hours and then wash them without any detergents in the washing machine?

Or is the soak enough by itself? I know there should be some agitation on the denim for it to shrink properly, so not sure if the soak is enough. I wish to have the waist go down about an inch and will have them hemmed to an 30 inseam, so I would really need to have all the shrinkage out of the jeans before this.

Thanks in advance for any advice!

[goosehd]

@Opa This is the gospel:

Here is the full, official Iron Heart wash guide for UHR denim:

“ULTRA HEAVY RAW (UHR) DENIM

An initial soak or wash is particularly important with this denim, as it is very stiff and abrasive in its raw state, so can cut through the constructional stitching if not bedded in. The denim is loom-state (there has been no post weave processing performed on the denim), so it will shrink and skew. Our UHR jeans are designed to be “shrink to fit”, so after washing or soaking a couple of times they will shrink to tag size. You are likely to see about one inch shrinkage in the waist and two inches shrinkage in the inseam. When you get your jeans, soak them in a bathtub or large sink of cold water for a few hours. Then turn them inside-out and wash them in a washing machine* at no hotter than 30 degrees C (circa 90 degrees F), you do not need to add washing powder or detergent. Ideally no spin (or very slow spin) and don’t put them in a tumble dryer, it is far better to allow them to air dry (still inside-out). Before they are completely dry, turn right side out and try to smooth out all the wrinkles.”

Here’s the link to it:
https://www.ironheart.co.uk/content/product-care-guidelines

Thank you @neph93

[Jbarb7]

I’m sure this has been asked but is this stiffer than the 21oz after initial soak? I have the 25oz and it’s just too stiff

[Luijim78]

@Jbarb7 yes it is much stiffer than the 21oz and stiffer than the 25oz (which softens after some wear)

[Jbarb7]

@Luijim78 thanks

[Oaktavia]

So it begins @Nik

[Nik]

Dude @Oaktavia great start

[Oaktavia]

@Nik thanks man, I reached 250 wears with my pair of 634XHS and think that will be it for now. Focusing on these and soon to be 888XHSib. 15 days so far in the UHR. How're yours?

[Nik]

@Oaktavia great stuff. I’m loving wearing mine but they are nowhere near yours. I am the tortoise and you are Achilles

[Oaktavia]

@Nik i like your chain setup, that's cool. We all enjoy them in our own way. My ADHD means I obsess over wearing them for long period of time. Better than drugs!

[Nik]

Much better

[Oaktavia]

Day 22 888UHR
Day 1 888XHSib

[Subprime]

Almost 300 days in the UHRs

[Oaktavia]

@Subprime looking super nice. Do you count washes too?

[Subprime]

@Oaktavia I sure do! I’m at 10 washes, first one was at day 55. I wash hot every time. I tumble dry hot until they are bone dry about every other wash.

[Oaktavia]

@Subprime wow, nice dude great fades. Thanks for sharing.

[Oaktavia]

At the recent party on Gosport, @Giles punched out my name in a piece of cardboard/stock. He used this awesome old timey letter punching mechanical machine in the repairs shop. @endo was there and I think @Fades-for-future was too but I didn't realize it was him at the time. Anyways Giles was saying he spray painted tshirts or something similar with other words he punched previously.

Not sure who's idea it was to spray my name stencil on a pocket bag of my new UHRs I had just bought there. Giles said the paint he used before in the shop had been there for a while and was likely too old to risk it. He recommended I just do it at home. So here it is, my modded pocketbag name tag made my the dude himself. Just got around to doing it tonight. Oh, and not to forget the Boss's John Hancock below it (don't fret, I made sure to cover it before spraying).

I didn't notice before but it appears a certain someone must have been shown the nifty letter punching machine before me. Wonder who it could be. @Kasi

[WhiskeySandwich]

@Oaktavia that’s rad man, def makes the pair extra special, the sentiment enhances the experience feelin it

[Oaktavia]

@WhiskeySandwich said in IH-888S-UHR - 21/23oz Ultra Heavy Raw Selvedge Denim High Rise Tapered Cut Jeans:

@Oaktavia that’s rad man, def makes the pair extra special, the sentiment enhances the experience feelin it

Thanks man, glad you dig. I really love this pair now more than ever. Ties them to that specific trip to the UK that I will always remember fondly.