Clocks, timepieces, etc.
-
@goosehd that may be possible with some. Others are inaccessible or go into a huge sulk if you move them.
The movement on this is exactly what you’d expect from France c. 1885 and isn’t that accessible. Hope this tides you over for now.
-
As you keep encouraging me here’s one of my smaller ones (c 1865 “one-piece” case). The videos (if they work) should keep Dennis happy.
“Every day that you survive you get a free sunset“
-
While this piece is technically referred to as a "watch" I think this is the more appropriate thread. It is a large Patek Philippe pocket watch called the Calibre 89.
It measure 88.2mm diameter, 41mm thick and weighs 1.1 Kg / 2.4 lbsThis is the prototype piece made in the late 1980's. This one has a yellow gold case and can be found in the Patek Philippe museum in Geneva. Four pieces were made in 4 different case materials, pink, white and rose gold and a platinum case. These 4 watches were released in 1989.
33 complications on this watch, 24 hands and 1728 individual components.
Complications include:
Grand sonnerie
Petite sonnerie
Trip minute repeater (westminster on 4 gongs)
Alarm
Day of the month
12-hour recorder
Day of the week
Hour of second time zone
Moon phase display
Winding crown position indicator
Century decade and year displays
Leap year indicator
Power reserve
Month
Thermometer
Date of Easter
Time of sunrise
Equation of time
Star chart
Sun hand
Time of sunset
Split second handhttps://www.hodinkee.com/articles/patek-philippe-caliber-89-easter-problem
-
The Patek museum in Geneva is definitely worth a visit if you have any kind of interest in horology. An incredible collection of Watches, clocks, automaton and jewelry.
If you are lucky enough to have a Patek on your wrist while in Geneva, entry to the museum is gratis.
-
Back after a short interlude and currently living one hour in the future.
Personal interest: this belonged to my grandad and I almost killed it when I was about 3 (I was stopped from pulling it off a shelf just in time).
Forum interest: I was lucky enough to chat with the legendary Filthy about this after he saw it one UHHH.
Technical note for Dennis (apologies if too basic): The pennies and card lifts are to keep it level and in beat.
-
@goosehd I leave that side of things to the pros - best to completely disassemble, clean, check for wear and reassemble before lubricating, which is way beyond my ability! I can cope with unhooking the pendulum, raising/lowering the bob and repeating as necessary and with basic set up (e.g. making sure it’s in beat).
Edit: Like almost everything, you can avoid a whole lot of shit if you understand the limits of your competency!
