Wesco Chukka's

[neph93]

@thomas01:

Fit is like Standard Wesco Boots Jobmaster / Tie Domain Boot ?

If you get a pair made on the Boss/Jobmaster last it will be. If I understand correctly there will also be the option of having it made on the MP last which has a slightly different fit (although sizing is more or less the same).

[T.J.]

@neph93
thank`s a lot

[Alex_24]

@neph93
@Alex
Are the Boss and Jobmaster toes wider than the MP? Which one is the widest/broadest?

I wear US 12D in Red Wing Round Toe/Rovers. However, I simply cannot wear a Red Wing Moc Toe because the 12D is too tight in the toes and the 13D is too big. Unfortunately, they don’t make a 12.5D.

I’m guessing a US 12.5 D in either the Boss or Jobmaster would be ideal.

What do you think [emoji848]

[neph93]

I'm somewhere inbetween an E and a D fitting. I err towards the D in Boss/Jobmaster and E in the MP. It isn't that the MP last isn't wide. At it's widest point it is the same as a Boss last, more or less, but it does taper at the toe end.

[Chesson]

@neph93:

I'm somewhere inbetween an E and a D fitting. I err towards the D in Boss/Jobmaster and E in the MP. It isn't that the MP last isn't wide. At it's widest point it is the same as a Boss last, more or less, but it does taper at the toe end.

I was just about to respond with something similar @neph93

A good fitting toe can come down to the shape of your foot. If you are quite flat toed then the Boss toe may be the better option as the MP is tapered.

[Giles]

Bison confirmed…..

[Giles]

[ROman]

I like these a lot…….So does Ralph

[Giles]

[jdl1279]

Any update on when pre-orders will open?

[Alex]

Later today or tomorrow

[Alex]

You can now place your deposit order here, then we will follow up with a custom build form

NOW LIVE

[jdl1279]

Boom! These should be dope

[den1mhead]

Deposit order . . . . . Placed 

[jdl1279]

What did you go with?

[den1mhead]

@jdl1279:

What did you go with?

@jdl1279 I went for these which are the ones shown earlier in this thread.

[jdl1279]

Those are a great looking build. That Charcoal is beautiful. I'm excited to see what mine end up looking like and what others cook up

[rblnr]

@den1mhead:

@jdl1279:

What did you go with?

@jdl1279 I went for these which are the ones shown earlier in this thread.

Those are charcoal, not slate rough-out, correct?

[jdl1279]

Correct, the slate was a lighter grey

[den1mhead]

@rblnr:

Those are charcoal, not slate rough-out, correct?

@rblnr I went for Leather Roughout Slate and I understand the ones in the image are also Leather Roughout slate