IHV-36-BLK - Primaloft® Gold Quilted Vest - Black
-
I’m kinda bummed. The armhole looks pretty tight, probably too tight for me with a UHF on.
-
I'm just about OK with an XL UHF and an L in this, but it is marginal…..
I could almost upsize to an XL but it seems it would be blocky and loose at the waist.
I cant stand clothing that runs tight at the armpit. It tends to make me sweat, etc -
vest looks on par with all the crew does
both fits on this page have me looking at the products you have the vest paired with
-
I’ve never bought a vest before so I would appreciate some advice on the sizing from the vest nerds out there.
I wear an M in 95% of IH shirts and assume that’s what I would take in this one. Especially since Giles wears an L and is always a size or two larger than me. I plan to wear it over a shirt and under a jacket.
Reuben told me last weekend that chest measurements are slightly different for vests due to the cut of the arm holes, but I can’t remember what that difference is. Is it that vest fits larger than a shirt with the equivalent chest dimensions since the measurement is taken lower?
The length seems a bit short. Approximately 3in shorter than a shirt of the same size. Is that how a vest is supposed to fit?
I’d go M if I were you. The armholes on this and general design is different to type III vests and work vests. As noted the arm holes are smaller so closer to your UHF measurement is probably good.
I’d most likely go L over a henley and XL over a UHF/tee. I take XL in UHF’s.
-
I’ve never bought a vest before so I would appreciate some advice on the sizing from the vest nerds out there.
I wear an M in 95% of IH shirts and assume that’s what I would take in this one. Especially since Giles wears an L and is always a size or two larger than me. I plan to wear it over a shirt and under a jacket.
Reuben told me last weekend that chest measurements are slightly different for vests due to the cut of the arm holes, but I can’t remember what that difference is. Is it that vest fits larger than a shirt with the equivalent chest dimensions since the measurement is taken lower?
The length seems a bit short. Approximately 3in shorter than a shirt of the same size. Is that how a vest is supposed to fit?
I’d go M if I were you. The armholes on this and general design is different to type III vests and work vests. As noted the arm holes are smaller so closer to your UHF measurement is probably good.
I’d most likely go L over a henley and XL over a UHF/tee. I take XL in UHF’s.
Thanks! I got an M.
-
I’m going to give it a shot. I feel like I’ve waited so long for this vest that it would bug me to never know if it fit or not!
-
You buying another vest? I'm shocked [emoji3]
Sent from my Pixel 3 XL using Tapatalk
-
-
You buying another vest? I'm shocked [emoji3]
Sent from my Pixel 3 XL using Tapatalk
You’re one to talk
One large left!
-
Tempting for sure…
Sent from my Pixel 3 XL using Tapatalk
-
I think I remember the IHJ-08 being made in a factory that specialized in Japanese military garments. Is this vest made in the same factory?
Anyone have any fit pics?
Mine arrives tomorrow! -
Terrible fit pics of a great vest. I sized an x-large and it will accommodate a flannel easy enough. Construction is over the top and makes my Patagonia lightweight pieces feel like Kleenex. I expect this piece to be pretty warm!
If it wasn’t still obnoxiously hot I’d wear it today [emoji3062]
Ignore my wife’s work stuff on the desk [emoji849]
Sent from my iPhone using Tapatalk
-
Nice! I have the IHV-32 in a size L so I took a chance on this in an XL given the measurements looked similar… hoping it fits!
-
Nice! I have the IHV-32 in a size L so I took a chance on this in an XL given the measurements looked similar… hoping it fits!
I hope so, post some pics when it arrives!
Sent from my iPhone using Tapatalk
-
Nice! I have the IHV-32 in a size L so I took a chance on this in an XL given the measurements looked similar… hoping it fits!
Did it work out?
Sent from my iPhone using Tapatalk