IHJ-75-BLK - Primaloft Mountain Parka
-
I know that, what I was saying is there does not need to be if you know what size you are in a UHF, because you can see what others wear in this and in a UHF. So if someone wears an L in this and an L in a UHF then its pretty reasonable to assume you would be the same in both too.
i totally get this now, went over my head. i should look at how folks are adjusting their sizing for the jacket and make the same adjustments on my end. shouldnt make a difference on the actual size, just know to go up or down or the same. sorry about that. i need to go double check my UHFs, i think the westerns fit tighter on me than the workshirt. thank you for your help.
- topic:timeago-later,11 months
-
Still loving this parka! Layered over a UHF and 11oz tee along with my Jean obsession atm, the indigo snake
. 
-
@Bdrumm we did not take any of the new run this season but the following retailers did:
-
It's getting cold and if anyone is still looking for this great parka, we still have a few sizes, see here: https://ironheartgermany.com/products/ihj-75-primaloft
-mountain-parka-black -
I'm having my eye on a black one but I'm wondering what are the care instructions?
I assume that you can wash the parka in the washing machine like all outdoor or winter sports jackets. It is best to choose a gentle cycle with a maximum temperature of 30° C or 40° C and a low spin speed. To wash the jacket gently, you should use little liquid detergent (no fabric softener). This is because washing powder can get stuck in the fibers of many materials and reduce breathability. Also wash inside out to protect the fabric.
- topic:timeago-later,9 days
- topic:timeago-later,28 days
-
This is a monster of a jacket!!
I admit that I did not expect it to impress me as much as it eventually did. The main motivation for purchase was the necessity, eVent membrane parameters and the fact that Haraki hinted on the price increase for all PrimaLoft products. But when I finally put it on, it was the cut that made it for me. It is my first ever winter jacket that fits and feels good. The details are as expected from IH, the durability will really show itself after some use and abuse, but it feels built for eternity.
And while earlier I was inquiring on how to wash it, recently the man himself (Haraki) was washing his (after few years of use), and with fantastic outcome. It was all done in washing machine with only spinning omitted to avoid wrinkles and rub lines. No fuss!
I am attaching his pictures from drying.
It’s a keeper!
-
I picked one of these up from iron shop and really delighted I did - really well made and solid. Out of interest what is the oz of insulation / down fill equivalent? While it’s warm it’s not crazy warm so layer8ng important as ever in zero minus temps
-
Thats a good question @Pete !
Depending on the activity You might want to add few layers. The sleeves become more full and harder to bend depending on the number and thickness of the layers but so far, I found that with brisk walk / hiking at –6 degrees Celsius I only need my trusty crewneck from Woolpower (https://woolpower.se/shop/produkt/crewneck-200/) while I needed 13,4oz Henley from Merz b. Schwanen (https://merzbschwanen.com/shop/2s04-01-men-s-loopwheeled-henley-heavy-13-4oz-relaxed-fit-6952?collection=157) plus Extra Heavy Flannel from UES (https://www.japaneseselvagejeans.com/goods_en_SEK_1594.html) when standing for a longer time in the same conditions. - topic:timeago-later,11 days
-
I also picked this up from iron shop provisions, the zipper on mine is a little stubborn at the bottom - cannot easily zip and unzip… any thoughts on how to improve this?
-
-
Also its dark outside, 10 degrees F, feels like -4F with 15 MPH winds… I am warm enough with a UHF underneath this jacket and the hood on! Nice Parka... I would definitely take this snowboarding as well.
-
@constant:
Also its dark outside, 10 degrees F, feels like -4F with 15 MPH winds… I am warm enough with a UHF underneath this jacket and the hood on! Nice Parka... I would definitely take this snowboarding as well.
Tested it out in -16 Celsius today with waffle and a loopwheel and it did fine - albeit wasn’t standing around!
-
@constant:
I also picked this up from iron shop provisions, the zipper on mine is a little stubborn at the bottom - cannot easily zip and unzip… any thoughts on how to improve this?
Like the quilted riders jacket I think there is a trick. Connect the zip grab the toggle on the end pull down away and out without detaching the zip and then up - works every time
I put a little dish soap on it and now its good