IH-634S-UHR - 21/23oz Raw Selvedge Denim Straight Cut Jeans - Indigo

[neph93]

@Dmart:

Sounds like you quoted my lady 

You have my sympathy (and empathy [emoji38])

[Dmart]

[Stefan]

Hi, I’m having a confused moment, perhaps someone can straighten me out - when hemmed UHR jeans are posted in the “reloved” section, how do I figure out what washing (and shrinking) was already done?

[neph93]

@Stefan:

Hi, I’m having a confused moment, perhaps someone can straighten me out - when hemmed UHR jeans are posted in the “reloved” section, how do I figure out what washing (and shrinking) was already done?

That pair are unused I believe, so treat as new. If you need to be super sure drop a email to shop@ironheart.co.uk

[Giles]

If they look new, then we only hemmed them for the studio shots, no washing involved….

[goosehd]

UHR denim is so hairy…

[A Former User]

@goosehd yeah.. i saw the same thing the other day on my uhr 555’s great hairy beast haha! How is your UHR developing?

[T4920]

Do people tend to wash their UHD straight away to getting the shrinkage out of the way, or wear untill a wash is needed and then shrink to fit?

⁴⁹ ²⁰

[goosehd]

@T4920 The recommended method with UHR is to soak first, then wash. This because it is loomstate. The soak activates the cotton fibres and embeds the stitching, the wash gets the shrinkage out.

Wearing the jeans and skipping the above step could/will lead to a very unhappy experience…

[goosehd]

From my understanding it will cause premature wear and potentially cause a blowout.

@neph93 Did I get this right?

[goosehd]

@Heavy_blue:

@goosehd yeah.. i saw the same thing the other day on my uhr 555’s great hairy beast haha! How is your UHR developing?

@Heavy_blue Slow progress as usual, but I am starting to see hints of electric blue in higher wear areas.  My previous experience with UHR was that it seemed to take forever and then one day they just looked amazing.

[neph93]

@goosehd:

From my understanding it will cause premature wear and potentially cause a blowout.

@neph93 Did I get this right?

Absolutely. The UHR is loomstate. No processes have been performed on it. This means that the constructional stitching is not embedded into the fabric and can pop out. In addition the fabric is so dry and stiff that creases will be very sharp and abrasive and can tear.

Soaking AND an initial wash are necessary to embed the stitching and finesse the fabric. Shrinking is a by product of this.

[T4920]

@goosehd:

From my understanding it will cause premature wear and potentially cause a blowout.

@neph93 Did I get this right?

Thanks for the info. Currently rocking a pair of 666 SBGs and am torn between a pair of UHR 666s and pair of 19oz Lefty 555s to add a pair of indigo heavyweights to my collection. My SBGs measure 34.5 in the waist and 35.4 in the inseam, and are just slightly too long (even with a chunky Japanese cuff) and little loose around the waist. If the size 34/36 UHR 666s shrink as advertised (an inch in the waist and two in the inseam) I feel like they'd be the literal perfect pair of jeans for me as I'm in love with the 666 cut, but I'm conscious of the fact that expected shrinkage isn't an exact art… If you could share your wisdom on the subject I'd be tres grateful [emoji1374]

⁴⁹ ²⁰

[neph93]

If you want to end up with a 34 waist then get a pair that starts at or just under 34” when new. Pretty much no one gets 2” in the inseam. That is a theoretical maximum.

[T4920]

@neph93:

If you want to end up with a 34 waist then get a pair that starts at or just under 34” when new.

So that accounts for initial shrinkage and the stretching back out with wear?

⁴⁹ ²⁰

[goosehd]

@T4920  The shrinkage in the waist is temporary. If you normally wear a 33 inch waist with a 33 inch measurement you should buy that size.  Yes the UHR's shrink, but the waist will stretch back out under constant tension.

[neph93]

@T4920:

@neph93:

If you want to end up with a 34 waist then get a pair that starts at or just under 34” when new.

So that account for initial shrinkage and the stretching back out with wear?

⁴⁹ ²⁰

Correct.

[T4920]

@neph93:

@T4920:

@neph93:

If you want to end up with a 34 waist then get a pair that starts at or just under 34” when new.

So that account for initial shrinkage and the stretching back out with wear?

⁴⁹ ²⁰

Correct.

Thank you [emoji1374]

⁴⁹ ²⁰

[goosehd]

@neph93 Beat me… Thanks!!!

[neph93]

@T4920:

@neph93:

If you want to end up with a 34 waist then get a pair that starts at or just under 34” when new.

So that accounts for initial shrinkage and the stretching back out with wear?

⁴⁹ ²⁰

I’ll add that this also incurs som initial discomfort [emoji1]