IHSH-332-SAX - Ultra Heavy Flannel Anniversary Check Western Shirt - Sax
-
Probably for a general thread, though curious to know what denotes the sleeve length. Why such differences across UHF's. Is it a technical limitation with fabric or weave or more a preference when designed. I realise in this instance it may be to be true to the original but always wondered why so many differ.
-
99% of sizing is absolute crap when you are comparing different companies and their sizing methods. Saying that I wear XL in Filson so that I should get XXL in Iron Heart is an absolute disaster when choosing and picking sizes….
Exactly this. Size chart all things.
Im a MEDIUM in Filson "vintage flannels"; Iron Heart western…XXXL !!!
-
I don't believe there is a general consensus to size up on UHFs. I've always worn the same size in UHFs as all my other shirts.
For the record, I automatically assumed that you meant to size up with respect to other IH shirts. And by all my other shirts, I meant all my other IH shirts. It didn't even cross my mind that you were considering non-IH shirts. I've only bought IH shirts for at least the last 5 years. I guess that shows what kind of bubble I'm living in
-
Probably for a general thread, though curious to know what denotes the sleeve length. Why such differences across UHF's. Is it a technical limitation with fabric or weave or more a preference when designed. I realise in this instance it may be to be true to the original but always wondered why so many differ.
One reason that has been given for the variation is that the fabric reacts differently to the dyes of the various colors.
-
@waXology I think the only people who would be able to answer this question is @Giles @Alex or Haraki.
The longer sleeves in the past was a purposed design in regards to riding motorcycles and sleeves riding up as you ride.
Fortunately, the UHF sleeves have increased in length over the years. The early ones, such as the IHSH-32 and the maroon buffalo check had uncomfortably short sleeves. They were about 24 inches on a medium. Much shorter than the 26 inches on the modern UHF mediums.
-
@waXology I think the only people who would be able to answer this question is @Giles @Alex or Haraki.
The longer sleeves in the past was a purposed design in regards to riding motorcycles and sleeves riding up as you ride.
Fortunately, the UHF sleeves have increased in length over the years. The early ones, such as the IHSH-32 and the maroon buffalo check had uncomfortably short sleeves. They were about 24 inches on a medium. Much shorter than the 26 inches on the modern UHF mediums.
Super interesting about the longer due to riding. I love features designed for a purpose. Reminds me of a couple flannels from another JP brand that have 24" sleeves in a sz42. Super short which i grew to absolutely love. They are both work shirts which I always assumed had shorter sleeves for well, ease of working? There's a sweet spot though and I'm still enjoying finding it
-
99% of sizing is absolute crap when you are comparing different companies and their sizing methods. Saying that I wear XL in Filson so that I should get XXL in Iron Heart is an absolute disaster when choosing and picking sizes….
Exactly this. Size chart all things.
Im a MEDIUM in Filson "vintage flannels"; Iron Heart western…XXXL !!!
Well.. we all know that Filson Shirts and Jackets only fit a tribe of Pacific NW barrel chested fat dwarfs with excessively short arms ???
-
I've been through the storm to get my parcel this afternoon, beanie and wabash are drying, quick fit pic, one was really too quick ahah :o
-
Probably for a general thread, though curious to know what denotes the sleeve length. Why such differences across UHF's. Is it a technical limitation with fabric or weave or more a preference when designed. I realise in this instance it may be to be true to the original but always wondered why so many differ.
One reason that has been given for the variation is that the fabric reacts differently to the dyes of the various colors.
True
-
There are quite a few of these on eBay. Are they counterfeits?
-
@waXology I think the only people who would be able to answer this question is @Giles @Alex or Haraki.
The longer sleeves in the past was a purposed design in regards to riding motorcycles and sleeves riding up as you ride.
Fortunately, the UHF sleeves have increased in length over the years. The early ones, such as the IHSH-32 and the maroon buffalo check had uncomfortably short sleeves. They were about 24 inches on a medium. Much shorter than the 26 inches on the modern UHF mediums.
Super interesting about the longer due to riding. I love features designed for a purpose. Reminds me of a couple flannels from another JP brand that have 24" sleeves in a sz42. Super short which i grew to absolutely love. They are both work shirts which I always assumed had shorter sleeves for well, ease of working? There's a sweet spot though and I'm still enjoying finding it
Yep, longer sleeves help a lot when riding a motorcycle. I also appreciate it when sitting in the car, which (let's be honest) I do more often than riding my motorcycle. All this being said, I have long arms, so I have spent most of my life trying unsuccessfully to find long sleeve shirts that don't ride up my forearms.
As to the sizing up discussion, I have to agree with those who say "Use the size charts every time". Occasionally I order a size larger or smaller based on measurements, but sometimes a piece just doesn't work out for me in any size.
I would add this advice: if in doubt, size up. I'm very familiar with my ideal shirt measurements, but I've still been burned by more than one shirt that was close on measurements and ended up being too small - usually in the sleeve circumference.As to the sizing up on UHFs - I will say, I can sometimes go down to XL in denim and Chambray IHs shirts, but I always buy an XXL in UHFs - they seem to be consistently too narrow in the chest for me in an XL. I can even get away with XXXL in some UHFs, so long as the sleeves aren't over 28" long.
-
99% of sizing is absolute crap when you are comparing different companies and their sizing methods. Saying that I wear XL in Filson so that I should get XXL in Iron Heart is an absolute disaster when choosing and picking sizes….
Exactly this. Size chart all things.
Im a MEDIUM in Filson "vintage flannels"; Iron Heart western…XXXL !!!
Well.. we all know that Filson Shirts and Jackets only fit a tribe of Pacific NW barrel chested fat dwarfs with excessively short arms ???
This made me laugh out loud! Pacific NW dwarves with short arms…
As tall guy with long arms, I've always joked that Schott jackets were designed for the short barrel chested Italian guys you see in NYC / Jersey.There are quite a few of these on eBay. Are they counterfeits?
I was thinking this too since they popped up days before the actual IHUK release. Good to know they're likely genuine.
-
Sizing Experience
Here's my experience regarding the sizing of this shirt.
Shirt Selection
I've always worn size Medium in UHFs. The one place that a UHF can potentially not fit me well is along the sides, at the top of the upside-down U. Some are too short and it's almost possible to see my skin between the shirt and my belt.It's been my experience that overdying does not shrink all products in a particular run identically. Fortunately, I was in Gosport last weekend and was able to measure the side seam of all Mediums on the rack and there was a variation of approximately a half an inch between the longest and shortest shirts.
I narrowed my selection down to the 4 shirts with the longest side seams and tried each of them on. Variations in the other dimensions were not noticeable visually so I selected the one which felt like it had the tightest arms and cuffs.
Shrinkage
The overdying process removes most of the shrinkage and my measurements confirm this. The only noticeable shrinkage was in the sleeves (1 cm). Note that wearing the shirt also caused creases around the inner side of the elbow and that accounted for almost another centimeter of lost length.| Measurement | New | Washed | Worn |
| Shoulder | 43.0 | 43.0 | 43.5 |
| Length | 73.5 | 73.0 | 73.0 |
| Arm | 67.25 | 66.25 | 65.5 |
| Chest | 53.0 | 53.0 | 53.0 |
| Waist | 51.5 | 51.25 | 51.5 |
| Opening | 51.5 | 51.25 | 51.5 |
| Cuff | 11.5 | 11.25 | 11.5 | -
Sizing Experience
Here's my experience regarding the sizing of this shirt.
Shirt Selection
I've always worn size Medium in UHFs. The one place that a UHF can potentially not fit me well is along the sides, at the top of the upside-down U. Some are too short and it's almost possible to see my skin between the shirt and my belt.It's been my experience that overdying does not shrink all products in a particular run identically. Fortunately, I was in Gosport last weekend and was able to measure the side seam of all Mediums on the rack and there was a variation of approximately a half an inch between the longest and shortest shirts.
I narrowed my selection down to the 4 shirts with the longest side seams and tried each of them on. Variations in the other dimensions were not noticeable visually so I selected the one which felt like it had the tightest arms and cuffs.
Shrinkage
The overdying process removes most of the shrinkage and my measurements confirm this. The only noticeable shrinkage was in the sleeves (1 cm). Note that wearing the shirt also caused creases around the inner side of the elbow and that accounted for almost another centimeter of lost length.| Measurement | New | Washed | Worn |
| Shoulder | 43.0 | 43.0 | 43.5 |
| Length | 73.5 | 73.0 | 73.0 |
| Arm | 67.25 | 66.25 | 65.5 |
| Chest | 53.0 | 53.0 | 53.0 |
| Waist | 51.5 | 51.25 | 51.5 |
| Opening | 51.5 | 51.25 | 51.5 |
| Cuff | 11.5 | 11.25 | 11.5 |Did you find the arm/cuff to be particularly roomy on this shirt compared to other UHFs?
Sent from my KB2003 using Tapatalk
-
I felt that the cuff was a bit looser than the other UHFs. But I have skinny arms.
