IH-666S-UHR - 21/23oz Ultra Heavy Raw Selvedge Denim Slim Straight Cut Jeans

[Kasi]

@Daniel San

777 XHS I have to size up by 2 size to get waist right.

Did you size up.

It’s low waist

To avoid builders crack 

[Daniel San]

Yes Sir l sized up from 31 in 634 to 33 in 777 XHS . Bailey found me a perfect waist size .

[Kasi]

They will fit you fine.

[thomms]

hi @Kasi ,
how much shrinkage do you expect at rr/fr?
thanks

@Kasi:

Sorry I didn’t because I wasn’t worried about them.

My only concern was the length and waist..

I have done all this before..

With old uhr 777 to be honest it turn into something else to make them work.

But thinking about grabbing the new uhr 777 to but gonna size up by 2 sizes to be safe due to low waist.

I went of my 25oz 666 XHS to match the UHR 666

It works for me.

[Kasi]

@thomms
Here you go

Mine back rise is now 14 inches was 15 inches

Front rise is now 10.3 inches was 10.6 inches

[Kasi]

Oh that patch turn out nice as hell

[Kasi]

Tomorrow gonna be doing soaking and washing the 777 UHR
Once they arrived.

First gotta make sure the fit is correct

[Pipeboss713]

Let’s go!

Sent from my iPhone using Tapatalk

[the246guy]

^ Please post your pre and post soak / wash measurements. I'm on the fence if I should go Tag size 30 or Tag size 31.

[pechelman]

Wow. This denim is no joke. Slightly worried, but in the best possible way. Honestly more gnarly than I was expecting; seems to be about 21:XHS::XHS:UHR.

Soak done and in the washer right now. Drip dry overnight.

Had another pair that needed a soak so the UHR has company.

Hopefully will have some dimension comparisons tomorrow.

[Kasi]

Be brave nothing to worry about

Sent from my iPhone using Tapatalk

[pechelman]

Thanks, Kasi.

They actually seemed to mellow a good bit with the soak and wash. Much less intimidating now.
After a 1hr hot tap water soak followed by a front loader wash on the "hot" setting with low spin and a drip/air dry.
Pre / post

W: 17.6 / 17.2
T: 12.75 / 12.5
Fr: 11.0 / 10.6
Rr: 15.5 / 15.25
K: 9.0 / 8.75
H: 8.5 / 8.4
I: 36.3 / 35.5

I'm honestly a little worried they didn't shrink enough. Should I do anything more before hemming tomorrow?

[Mizmazzle]

These are listed as “Continuous Production” now. Does that mean the UHR will now be available as readily as the other denim fabrics??

[Giles]

Who knows?

If you read this:

https://www.ironheart.co.uk/content/what-is-uhr

You will understand that supply is very limited.  We have committed to producing it continuously, but that does not mean we can make a lot.  So supply is self-limited, thus availability at any point in time is totally dependent upon demand…..

[Mizmazzle]

Got it. Thanks @Giles

One day teachers will be paid like athletes and I will be able to buy everything I want!

[neph93]

@pechelman looks about right. Almost an inch in length and waist, and quarter of an inch in the thigh. There may be a little more but it will be marginal.

[pechelman]

@neph93:

@pechelman looks about right. Almost an inch in length and waist, and quarter of an inch in the thigh. There may be a little more but it will be marginal.

Thanks for the sanity check, neph. I saw some other folks getting 2" on the inseam to shrink. In the end I decided to wait on hemming today. Maybe will leave these to cuff as my only pair.

[Pipeboss713]

I got a lot of shrinkage of of mine
Inseam is perfect and waist and things are kinda tight but the waist seems to be loosing up quickly

Sent from my iPhone using Tapatalk

[Pipeboss713]

Perfect fit!!!

Sent from my iPhone using Tapatalk

[SKT]

Finally placed the order for a pair of these and ended up going one size up from my usual 33. Thanks to everyone for their pre/post measurements because it really helped with sizing. And thanks to Bailey for working with me on finding the right pair!  Now just gotta wait for some hemming and for the brown truck people to do their thing.