IH-888-XHS - 25oz Selvedge Denim Medium/High Rise Tapered Cut Jeans - Indigo
-
@Nkwkfld yes they tightened up and still left you with a nice cuff!!
…a very comfortable cut!
-
Hi. What would be a slimmer version of the 888 XHS? I like the high rise, and I am only aware of the 555 XHS that also has the high rise but I think maybe the 555 XHS is too slim for me. So something that is in between the 555XHS and 888XHS and still maintaining the high rise cut which I like. Any suggestions?
-
Hi. What would be a slimmer version of the 888 XHS? I like the high rise, and I am only aware of the 555 XHS that also has the high rise but I think maybe the 555 XHS is too slim for me. So something that is in between the 555XHS and 888XHS and still maintaining the high rise cut which I like. Any suggestions?
I assume your asking about IH cuts, in which case there isn’t one. The 555 and 888 are also very different, with the 555 falling straight below the knee and having a roomy top block, while the 888 tapers all the way down the leg and has a top block which is meanongfully higher and tapers in from the yoke.
I would strongly consider sizing down in the 888 to achieve the look you want, if you are able to.
-
Hi. What would be a slimmer version of the 888 XHS? I like the high rise, and I am only aware of the 555 XHS that also has the high rise but I think maybe the 555 XHS is too slim for me. So something that is in between the 555XHS and 888XHS and still maintaining the high rise cut which I like. Any suggestions?
I assume your asking about IH cuts, in which case there isn’t one. The 555 and 888 are also very different, with the 555 falling straight below the knee and having a roomy top block, while the 888 tapers all the way down the leg and has a top block which is meanongfully higher and tapers in from the yoke.
I would strongly consider sizing down in the 888 to achieve the look you want, if you are able to.
Thanks @neph93 . I see that you own the 888model. Hope you dont mind me asking about stretch. My long term fit I am aiming for in the waist is about 81.5 cm. Am I correct that a size 31 measuring waist 79.8cm raw/brand new would be my correct fit? I am hoping they will stretch to +81.5cm and then after wash stretch back to +81.5cm.
-
@frankie72 That should work out ok.
Depending on your frame and body shape, the XHS can be a flexible cut. I have it in four iterations (UHR, XHS, XHSib and 21oz OD). The XHS you see in this thread is the biggest. I went true to size, which to my mind means they sit comfortably and I can easily get a finger or two between the waistband and and body. The other three are sized down from W34 to W33.
The idea is that given the high rise and narrow waist on these jeans they sit higher up the body where the waist is smaller. On me this works. They were all tight in the waist when new but have stretched out. I can't quite get the finger in-between but they are not uncomfortable.
Here are a couple of pics to show how that plays out in terms of fit:
W33 IH-888-XHSib:
W34 IH-888-XHS
As you can see the silhouette is different, with the W34 coming off as a relaxed tapered pair which was what I wanted, while the w33 is closer to a slim taper (on my chunky legs).
-
Great answer @neph93 . I was just bout to pull the trigger on a size 31 from the ironheart uk site but sadly received a message from Adam C that they have to temporarily suspend shipments to European Union (EU) countries
Seems no other european online retailer have this model in stock so I just have to wait a while longer. But big thanks anyways for great support!
-
Great answer @neph93 . I was just bout to pull the trigger on a size 31 from the ironheart uk site but sadly received a message from Adam C that they have to temporarily suspend shipments to European Union (EU) countries
Seems no other european online retailer have this model in stock so I just have to wait a while longer. But big thanks anyways for great support!
PM’d you [mention]frankie72 [/mention]
Sent from my iPad using Tapatalk
-
Any idea when tag 38 will be restocked on those fellows?
-
We have submitted the production order, but have not had a due date yes, I am afraid.
-
Just gonna have to wait. Thanks Giles! I will cop for sure when it gets back in stock.
-
-
So my 63421L pair has stretched to the point where the waist is falling off me now. I haven't lost any more weight recently. I was thinking about going for a pair of 36 in these and hoping the waist won't stretch as much…
-
I also copped a pair of these today. I figured after pestering Alex and Giles for over a year about making the 888 in plain XHS is was the right thing to do. The thing is when they came out I was on the verge of skid row. I can't wait to see my double chainstitch job. @spitfiredealer I finally got a pair hemmed to 33" so I can either go for stacks or maybe like a 1" cuff and a stack.
-
Nice Filthy. Look forward to seeing them on.
Sent from my iPhone using Tapatalk
-
It's been a long time coming then! Congrats on finally getting yourself a pair @Filthy. Kinda thought you'd pull the trigger on another pair of XHSib's before any other denim
