WESCO
-
I just registered on this forum lastnight for two reasons, mainly. One, to thank all the contributors here for the wealth of information on Wescos. And two, share my experience finding the perfect fit this week.
My intention was to order a custom boot with a custom size form, but was dreading the long wait and kicking myself for not figuring this out during the summer. I was initially thinking a custom Warren or a Jobmaster either 8” or 10” in height.
Beyond this forum, the Wesco Japan blog was a crucial resource in understanding the different custom options. Along the way, I learned that Baker’s in Eugene had a Romeo with MP toe that might be my size. I also had been considering making the drive to Eugene to help get sizing info that would allow me to pick a chart size and save the custom fitting fee.
This little trip (socially distanced, of course) turned out to be the right move, but not because the Romeos. The 10.5E MP toe Romeos were much heavier than I expected, and I had too much heel slip walking around the store. Ben, the gracious Baker’s employee assisting me, explained that as the sides around the instep stretch the leather at the toe gets pulled back which helps eliminate heel slip once broken in.
I asked if they had a jobmaster or any other Wescos that I could try to get a better feel for sizing and last differences. He brought out two different engineer boots — a brown Mister Lou and a black roughout boss. To my surprise, the upper was so narrow on both that I couldn’t get my heel seated completely. At this point, I really wanted to try on a lace-up Wesco, but Baker’s didn’t have any. That is until Ben checked in the back a third time — and I’m honestly still in shock about what he found.
He brought out a 10E Warren in black horsehide that a customer had custom ordered back in June through Baker’s in Eugene, but then refused them upon delivery. Kyle explained that it put them in a bind since they couldn’t return it to Wesco. Plus, after looking at my tracings and measurements he said they are my exact size.
I’m thrilled to have found these after making the trip to Baker’s. They’re almost exactly like a limited edition Warren the Japanese Wesco store has for sale on their website. However, the stamped logo on these is different and Ben at Baker’s said it is the vintage Wesco logo that is no longer used. I’ve included a few photos
of the Japanese store limited model it resembles. -
What an amazing story and glorious looking boots!!!
Also, awesome handle name
Sent from my iPhone using Tapatalk
-
What an amazing story and glorious looking boots!!!
Also, awesome handle name
Sent from my iPhone using Tapatalk
Thanks buddy, I’m still in disbelief how it all went down
-
What an amazing story and glorious looking boots!!!
Seconded - it is amazing how this worked out for you @Giallo Biafra buddy, totally unexpected and absolutely perfect. Bravo
-
@Giallo:
What an amazing story and glorious looking boots!!!
Also, awesome handle name
Sent from my iPhone using Tapatalk
Thanks buddy, I’m still in disbelief how it all went down
Sounds like it was meant to be!! Nice pick up, welcome to the forum BTW!!
-
Awesome boots and story to go with them. You need to go out and buy a lottery ticket.
hahahaha
at this point it’s been spades for two days straight
-
I want to send Wesco a photocopy of the original order form that was in the shoebox, in order to know the exact specs - but this is my best guess:
Custom Warren 10E
8” height
black horsehide
MP toe (MP95 last)**
unstructured/soft toe
unlined
vibram 700
single midsole
waxed heels and edges
standard height heels
brown lightweight upper stitching
whight heavyweight double outsole stitching
brass eyelits/hooks
nylon laces
brown (or random) inserts
no toe caps
no half slip
no welder’s tongue
*request old logo stamp** I’m honestly not sure on the last or toe. Maybe it is a round toe, either way I’ll see if I can get the original order specs placed back in June
-
Just talked to Chris at Wesco
He looked up the the original custom order and
this Warren is built with a jobmaster last/toe and standard 3 lift heel -
Welcome to the forum @Giallo Biafra now that you have your Wesco boots we need to get you into some IH denim.
-
Welcome to the forum @Giallo Biafra now that you have your Wesco boots we need to get you into some IH denim.
Thanks, glad I signed up and while I don’t have any IH jeans yet. I recently scored a very lightly worn IH type 1 jacket. It’s the black overydye collab IH did with Pronto from Thailand in like 2017 I think.
Definitely will post about it once I get some fades goin, looks good with my new black Warrens for sure.
It’s interesting how my Warrens ended up being jobmasters in disguise. The Warren has to be the most versatile for customizing of all the Wescos. Although, I did see some interesting jobmasters on the Wesco Japan blog — like this one with a MP toe. Just wild how many different looks each option provides
-
C width
-
headed my way and couldn't contain my excitement any more
Thanks @Chesson for the help and dealing with my countless "Are they done yet" emails lol
-
I'd love a pair of Wesco custom builds, but my negative experience with Viberg has put me off. So many variables that can go wrong.
If I could guarantee a perfect for I'd go for it.
-
Wesco’s lasts are not “roulet” like Vibergs.. I don’t think you would need a custom last to get a good fit. Order a few try in boots from Giles and see what size works best and then customize a platform you like.
More pics
Sent from my iPhone using Tapatalk
