IHB-06 - Heavy Duty "Tochigi" Leather Belts - Black, Brown and Natural
-
-
-
I was actually trying to decide between this one and the IHB-07 and I like this one better than the IHB-07. But there is one question that I would like to clarify. I will be using this one on my IH-721 Khaki Chinos which I have in tag size 32. I just measured the distance between the front 2 belt loops and they are just 8 cm apart. Now going by the dimensions of this belt, the square brass buckle is about 5.7 cm.
Can anyone please tell me what is the distance in cm for the dotted line that I have marked in the image below?
I just want to know if the brass hardware will sit comfortably in front of the pant loop or will it have to fight against the pant loop for space? Do you know what I mean? Can someone help me out?
EDIT: I got the reply from IH service and the measurement between the first blue dot and the 3rd blue dot is roughly 10 cm. Might be useful for anyone else!
-
Why don't you just send an email to shop@ironheart.co,.uk. It's the guy's jobs there, to answer questions like that.
-
Why don't you just send an email to shop@ironheart.co,.uk. It's the guy's jobs there, to answer questions like that.
I have done that, but I thought my particular question above would be interesting to anyone else as well which is why I posted it here in the first place!
-
Just placed the order for this beauty in brown!
-
@neph93 As a matter of fact that statement applies to every single IH product I guess!
-
Got this delivered today. As I knew it before and from the recommendation I went with size L and now I'm looking for some ways to make it fit to my size! I have 2 options:
1. The straightforward way of trimming it as mentioned in the forum here. With this approach I guess I need to get my measurements damn right otherwise I will end up messing the belt
2. With this option, I'm thinking of punching a hole (probably the 6th one) in the buckle area. What is the punch type used here? It looks like a "Spade shape".
I'm thinking of doing the option 2, but for that I would need to know the punch type used. Could you please let . me know what punch you used so that I can try to find the same one to be consistent in the holes?
-
Personally I think option 2 is a bad call. you'll end up with a very long "tail", but if you decide to go that route, then you need something like this:
Option 1, is super-easy. you just determine house much too long the belt is to get it into your preferred hole (the middle one being optimal IMO), and reduce the length of the belt by that much.
-
Okay! I see your point! I will try to see if I can go with the official IH way of shortening it! Will have to do some proper measurements to get the perfect size!
On the other hand it was also good to know that the hole punch shape is a Teardrop! If I could not get option 1, I will go for the option 2 and get myself a Teardrop punch!
-
Just did some measurements and I either need a new hole (from the base of the buckle) which is 3cm away from the default 1st hole of the belt or I need to cut away 3 cm from the belt so that the current 1st hole is exactly where I want. I will better take it to a leather shop nearby once it opens!
-
If you do not have a whole punch and stanley knife available then a big nail fornye Chicago screwed and a well sharpened kitchen knife will do. Again, I have done method with all the right gear and the second time I did it with what I had at hand. It worked great both times.
You are talking about the official way of aligning the size of the belt which is to follow the video, but for me I would start with the option 2 that I have in my mind and for this a Chicago screw won't help as I need a teardrop kind of a punch! I think the best bet for me would be to take it to a leather service nearby!
