Random questions to which you seek an answer
-
Hey guys,
I have the IH 666S 18oz & IH634s 14oz (I don't know if it is 14 or 142 as they seem to have the same leather patch).
But these two denim stretched in the waist and they are a bit too wide now :'(.I would like to shrink the waist, with warm or even hot machine wash, but I am afraid to blunder the denims. I have read that warm/hot machine wash can have bad effects on the denim (creases, uneven indigo bleed) and can even destroy the leather patch.
Can you guys share me some of your knowledge?
A regular machine wash (40C) will shrink the jeans back to the size they were when you bought them. If you do it at 800rpm or less, with the jeans inside out, then marbling, streaks etc shouldn’t be a problem. If you want to be sure then soak them with the shower head first.
Both the jeans you mention are fully sanforised so doing a very hot (90C) wash won’t do much more than a 40C but if you still want to give it a go then you should thoroughly oil the patch or even cover it with Vaseline to avoid it getting fried. I wouldn’t recommend it though.
-
I think you guys outside the us have more elaborate washing machines. Maybe i’m just due to replace my 20 year old model. It pretty much has 2 settings: hot wash/cold wash and large/small load.
-
I think you guys outside the us have more elaborate washing machines. Maybe i’m just due to replace my 20 year old model. It pretty much has 2 settings: hot wash/cold wash and large/small load.
I’ve heard that before. I don’t really get why… what brands are normal in the U.S? Mine is not an expensive model but I can set degrees C from 30-95 an rpm in increments of 100 from 400-1600. In addition there is a rich choice of programs.
-
I think you guys outside the us have more elaborate washing machines. Maybe i’m just due to replace my 20 year old model. It pretty much has 2 settings: hot wash/cold wash and large/small load.
Older models are pretty basic but I think the newer ones give more choices
Sent from my iPhone using Tapatalk
-
From a conservationist/engineering point of view, I love the idea of 20yr old washing machines and wish they were still a thing. The warranty on most mid-range new machines now is five years. If they don’t break down in their sixth year you’re lucky. When they do, the quote for a repair is so much, you might as well buy a new one. Planned obsolescence makes my teeth itch.
-
I’ve heard that before. I don’t really get why… what brands are normal in the U.S? Mine is not an expensive model but I can set degrees C from 30-95 an rpm in increments of 100 from 400-1600. In addition there is a rich choice of programs.
Mine is a Whirlpool. It's pretty high end and less than a year old (thank you, Sears going out of business sale). Nonetheless, temperature settings are Hot, Medium Hot, Medium, Medium Cold, and Cold, and spin settings are Fast, Medium Fast, Medium, Medium Slow, and Slow. I think Americans just don't want/expect that many choices.
-
@cj:
What would be the best way to address this? Noticed that the stitching has come loose near the waistband and since the end of the thread is quite short, I'm not sure what to do.
Many thanks!
I think you should wear those Jeans and never think about that tiny thread ever again. That is a small fray and nothing will come of it.
-
Hmmm okay. Maybe the photo isn't clear enough, but it's not a fray, rather the thread has been cut/is broken. I'm concerned that leaving it may cause the stitch to unravel (i.e. pulling the stitch in a certain direction will cause initiate the unravelling). I'll see what I can do to mitigate this…
-
That isn’t anything to worry about. I suspect it is only a loose end and even if it is a broken thread then the integral strength of the stitch will mean deterioration won’t happen. Remember, these jeans are over-engineered.
If you really need to then bind it to the rest of the stitching with thread and needle but without putting your stitches through the denim. It won’t be necessary though.
-
Many thanks for your input @Matty123 @neph93 @Giles. These things happen and are generally fixable (if necessary!). I suspect that the location of this loose thread won't really be of concern—it's just that I've had a cuff on a pair of jeans "unzip" after getting caught on something so thought it'd be best to see if I needed to do anything. Best to ask early than to assume! Thanks again
-
@Giles any chance of a broken twill denim?
-
Probably not, I mentioned it to H once. The silence was unbearable…..
He just looked at you until you felt bad about yourself. Dad move
-
Probably not, I mentioned it to H once. The silence was unbearable…..
Like this? [emoji23]
Sent from my iPhone using Tapatalk
-
so, will IH repairs e doing darning??
-
So are we going to see more stretch denim coming or will it just be a ignition exclusive?
Sent from my iPhone using Tapatalk
