IH-888S-21 - 21oz Selvedge Denim Medium/High Rise Tapered Cut Jeans - Indigo
-
These look so great!
I’m leaning towards the overdyed option assuming measurements look good after the OD process. If not, will pick up the 888S. This is my first purchase from IH - any chance these will sell out before the OD is released?
-
Glad I asked. Went ahead and ordered a pair. Thanks!
-
Yeah, I’ve been waiting for these for months. Thrilled to get my first pair of IH.
-
Fairly confident, as I’ve been measuring for quite a while (and getting feedback on this forum) and will be excited to try them on when they arrive. Fingers crossed.
-
Shit all the 38s gone already!
Oh well, have to give the 36s a punt!
Sent from my iPhone using Tapatalk
-
@Cutlasshound We only managed to hang onto one 38 - retailers should be getting the restock today ( @Danny RnH )
-
@Cutlasshound We only managed to hang onto one 38 - retailers should be getting the restock today ( @Danny RnH )
Thanks mate much appreciated.
Managed to pick up a pair of the 888s after work. Fit and size on these is golden!!!!
Sent from my iPhone using Tapatalk
-
So if I'm blowing the crotch out on my 777s after a year, the roomier rise on the 888 might fit the bill while still offering some moderate taper?
For sure.
The taper on the 888 is about the same as in the 777 it’s just that the starting point is wider. I blow out crotches in no time on 555’s and 666’s but not on 888’s and 634’s.
-
So if I'm blowing the crotch out on my 777s after a year, the roomier rise on the 888 might fit the bill while still offering some moderate taper?
For sure.
The taper on the 888 is about the same as in the 777 it’s just that the starting point is wider. I blow out crotches in no time on 555’s and 666’s but not on 888’s and 634’s.
You can also have a look at the 555 if you liked the 777. It offers enough room in the top block and a nice taper.
Thanks, both of you. I'm trying to wrap my head around the difference between the three (5,7, and
fits. The 7s were my entry point into IH bottoms, surprisingly bought mostly shirts. But I've absolutely destroyed them in less than a year. Currently working on my fourth home-brew crotch repair this Spring. Can't bring myself to wear anything else.The 8s sound up my alley but I'm still a bit lost in the primary difference to the 5s other than a similar rise but the 5s have more taper than the 7s?
-
Using the Compare function should help understand the differences. It’s all in the numbers. Take the IH-555-01, the IH-777S-21 and the IH-888S and use them to get an idea. The info here https://www.ironheart.co.uk/content/our-cuts-jeans and here https://ironheart.smugmug.com/PHOTOS/Cut-Guides/Cut-Guide/ will also help.
It’s all relative but I would say that the 888 is a high rise, regular width, tapered jean. It is overall wider than the 555 through the whole leg with a meaningfully higher rise than the 555. It tapers from the middle of the thigh.
The 555 and 777 are both slim tapered jeans. The 555 has a high medium rise, the 777 has a low medium rise. I wouldn’t say the 555’s have more taper than the 777’s. From knee to hem the 777’s have more taper in fact. The 555’s are a slimmer fit over all though as the taper starts higher up the leg and gives a slimmer knee than on the 777’s. Compare knee measurements to confirm.
While @Dion is right that the 555’s have more room in the top block, I shred them super quick as well. Some body types will do that to slim fitting jeans regardless of room in the top block.
-
-
The top button took a little bit of effort to fasten but nothing ridiculous and I felt them easing up on the waist fairly quickly.
I cuffed them to about where I think the length should be. Can I get any opinions on the length before I send them back for hemming?
They measure approx 32" on the inseam when they are cuffed as in the photos. Does 32" look right or should I go a little longer?
Thanks!
