IH-634-XHS - 25oz Selvedge Denim Straight Cut Jeans - Indigo
-
@cbnewman
I got my pronto double indigo 25oz tapered by rail car knee and below and it worked greet . I also reduce the leg opening and the job well done by rail car .
XHS doesn’t react at all. It looks all natural like it was tailored tapered by iron heartSent from my iPhone using Tapatalk
-
I had my 634DD tapered by RCFG and my 666xhs done by a local tailor who had worked with SE PDX quite a bit. Both pair turned out great
Sent from my iPhone using Tapatalk
-
@Filthy Did you change your moniker?
-
@piranha yes sir. For the final time.
-
that is until you become "the member formerly known as @Filthy"
-
Nah, I promised G it would be the last time. I should just change it to Mike. But that's already taken.
-
a promise is a promise.
great looking jeans BTW
-
MikeBarFilthy is available. Lol
-
ISFS IHUK staff.
-
These are my next pr. My 666XHSs are no longer a viable option.
-
@cbnewman
I got my pronto double indigo 25oz tapered by rail car knee and below and it worked greet . I also reduce the leg opening and the job well done by rail car .
XHS doesn’t react at all. It looks all natural like it was tailored tapered by iron heartSent from my iPhone using Tapatalk
That’s awesome. Do you know about how much you tapered the leg opening? I’m thinking as much as 1 1/2” maybe 2” but worried that will be too much
-
That’s awesome. Do you know about how much you tapered the leg opening? I’m thinking as much as 1 1/2” maybe 2” but worried that will be too much
Pro tip: Look at the tapered IH cuts (555, 777, 888, 633) to see which one you like and note the measurements at thigh, knee and hem. Measure the actual thigh on your pair and extrapolate from there. The last bit is important because you don't want to take a 634 thigh down to a 555 hem. That would give you a carrot cut. I'd recommend using the 888 as a starting point as this cut is based on the 634.
-
I always liked the measurements here, but was put off by the very large leg opening (waist 36) and need to taper. I'd rather not have to screw around with jeans straight off the bat, but that might be what I do if I buy these next. I have the 888 UHRs now, so time to eye up the next thing
-
I’m crossing my fingers for 888-XHS one day.
Just get these and taper? There's not that much difference. These have a tad less front rise but in my size they are otherwise the same…
-
I always liked the measurements here, but was put off by the very large leg opening (waist 36) and need to taper. I'd rather not have to screw around with jeans straight off the bat, but that might be what I do if I buy these next. I have the 888 UHRs now, so time to eye up the next thing
Great idea. I was going to base the taper off of two pairs of 3sixteens I have. Probably safer to base my measurements on existing IH cuts
I can’t afford any taper through the thighs however; 13” is a minimum as it turns out. Have a pair that measures at 12.5 and the crotch is blowing out because they bind
-
I’m not a fan of dicking around too much with my gear and there are plenty of options for me in the meantime. But 888-XHS would be a dream cut/denim combination. I’m happy to wait until it happens.
I'd go for a pair of 25oz XHS 888s too. If not the pair in my concept with the slash pockets and felled seams, and no yoke, just a regular pair would be great too.
-
@cbnewman I had my 634-XHS size 33, that I posted a couple pages back, tapered by RCFG to an 8.25" leg opening. Started the taper at their standard length from crotch to knee of 13", left the original knee width. I'm very pleased with the results.
-
