WAYWT - The Hard Labour Edition aka "Working in your workwear".

[rocket]

what he said, respect…

[neph93]

@rocket:

what he said, respect…

Respect will be due if it's still standing in 10 years time [emoji38]

[TheTrooper]

@neph93:

@Warner  amazing abuse showing on those ducks.

@TheTrooper  great shot. What's the harness and tackle for?

Thank you.
I´m a Rigger, I work at shows, climb in the roof structure of the venues and pull up the chains

[georgeel]

Spinning my fidget…

[ROman]

I'll post a photo of a job I'm starting tomorrow. I'll show the room with what I start with, then 7 days later the end product. I brought Iron hearts, and Wranglers, can't guarantee which I'll wear, it's Washington DC where I'm working. Today was 92 no humidity.

[neph93]

@ROman:

I'll post a photo of a job I'm starting tomorrow. I'll show the room with what I start with, then 7 days later the end product.

Looking forward to it.

[neph93]

The retaining wall is all but finished. Just need to take a stone cutter to some top blocks to take them round the corners.

Next step is 60m2 of deck. Starts tomorrow.

Here's my 68 that has been my work shirt for the past couple of seasons. Elbow blow out is imminent:

[Matty123]

@neph93:

The retaining wall is all but finished. Just need to take a stone cutter to some top blocks to take them round the corners.

Next step is 60m2 of deck. Starts tomorrow.

Here's my 68 that has been my work shirt for the past couple of seasons. Elbow blow out is imminent:

Well done Neph.

[ROman]

Retaining wall looks great.

[mikebarhoot]

neph, 1st, that wall is bhadd ahss. well done!

[scooter]

My 817 suffered a laceration to the outside of the right calf, last week. Some stitches will be required. Until then, I opted to put the UHR back to work…

[Dstauffer]

Can't go wrong with UHR 

[neph93]

I'm looking forward to the day when my UHR become work jeans. That denim drops indigo if you show it a picture of an abrasive surface.

[Jordonf9]

Dunno if you can call this hard labor, but continuing the stripping process of shellac from the stairs. Almost 1/2 way done….can see untouched on he left and stripped to the right. Thank God for acetone and MEK

[Jordonf9]

Here you can see the vast difference once stripped. Some spots are easy, some are caked on and cracked badly. This hoise was never kept up with much, if at all. That includes about 4 generations I believe…..

[neph93]

That's a tough job, without a doubt. Satisfying results though.

[Jordonf9]

Besides tons of sweating, the only time I'd say tough was last night. Hunched over the rail cleaning that area for about an hour to hour and half with my back screaming in pain. Going back at it later after installing a new window upstairs.

[Black Orchid]

Working in the garden in my IH-526Jod

[neph93]

^ Lovely garden and my favourite IH jacket. Nice wellies too [emoji1]

[Black Orchid]

^ Thank you neph [emoji4]