IH-821 - 16oz Super Black Fades to Grey Denim Double Knee Logger Pants
-
Don't get me wrong guys I love SBG, have quite a few pieces of it but for a work pair pants that get frequently washed and thoroughly trashed, super black would be my preferred choice. Love these pants that's why I have two pair.
-
I would agree as I love SBG and loggers, but the double front section is too short for my taste. If it was longer I'd be all over it.
I got a pair of these on the cheap off of eBay, and I really like them. This is my one complaint. I haven't used them for any real rough and tumble work, but I know if I did, my actual knee is barely protected. As a matter of fact, the edge of the fabric hits mid-knee if I'm kneeling. I always assume it's because I'm tall, but the problem could be fixed with like 4 more inches added to the outer layer.
Sent from my iPhone using Tapatalk
-
@Haddtoo 555 - how much stretch were you able to get out of these? Thinking I need to snag them in the sale this weekend - and depending on stretch, I'm between sizes.
Cheers,
-
That's a dilemma being in between sizes. As you know I buy them small and stretch mechanically anywhere from 2 to 4 inches typically. As far as sizing I'd rather wear pants that are too big then too small. It takes a while to figure that out
I can't imagine stretch being any thing different than what you've experienced with your previous selections. I know that's not much help but when I'm in doubt I buy two pairs in different sizes you could always let one pair go. These are awesome pants I didn't think I would appreciate them as much as I do. Post pics when you get them -
Thanks for the info @Haddtoo 555 - I think I'll play it safe on these. Just so I know, have you seen much shrink with your washes?
-
They tighten up when they hit the suds but they bag out in no time.
-
awesome. Thanks dude!
-
time for a wash and rotate
-
How are these with "toughness" to wear daily & tight weave(breathing)? Thanks!
-
They are holding up really well, I beat this snot out of them and they are a breeze to wear just wish they were super black
-
Just ordered me some size 36s. Be the first IH jeans I don't plan on tapering, want a looser pair for winter/layering. Was torn between these and the 822, but this material is just so nice with fading.
Have to add, ordered yesterday and with IH new DHL venture, supposed to be delivered tomorrow! Wow that is fast!
-
Finally came in this morning. As usual the detail and quality of IH gear is top notch. Love the SBG fabric is beautiful. Never seen this in person or touched till now. Loving it is a tighter weave(great for the cooler/winter weather) and that it isn't too stiff out of the bag. Great fit, pocket size and space for my hand to get into the front pockets are perfect. My 634 overdyed are a little tight IMO, but small little niggle.
The only things I could say that are not perfect to me would be the belt loops, more of less the placement of the 2nd one in on either side. Normally put my keys hanging there and prefer them at my 4, not my 5 or 6, but that is a very small niggle. I do have to get used to having a large hem. They work great with boots but not my sneakers. Even the big puffier skateboarding ones. Once they break in they will settle perfectly. Wouldn't mind another 1/2" rise on both ends, but that is my body specific.
Love em!
-
-
Another bonus, bigger pockets. More specifically, the back ones. Have enough room for my flashlight now
-
Finally dug these out of the closet and put them on for the first time today. First time ever wearing denim with the double-front engineer thing but I'm digging it. Very comfortable from the beginning and I can't wait to see how they evolve! The hem is slightly large - has anyone had these tapered?
-
I was thinking of having them tapered a little @Manticore as I usually only wear this and my 822 with boots as I normally wear smaller sneakers like cons and vans. Before I do so I gave them a hot soak and slight wash as to see if I can get any shrinkage and the denim was looking shiny due to wear. I didn't do a pre wash measurement but came up with one leg at 9.5 and one at 9.75. Surprised they were off, but I don't care.
I have sent three pairs of IH to finecar for tapering, which they did a good job. I usually get 36 sometimes 35, these are 36. I rather have these and the 822 slightly larger than my other pants and jeans, but just a hair bit too big. Still tossing up if I want to get them tapered to a 9" hem. Worried about the lines of the second layer looking off a little then.
I need to get a lot more hard wearing on these…
If you like these, the 822 is even more comfy to wear and fades beautifully. Enjoy
-
Thanks @Jordonf9 for the info. I assume you meant Railcar for tapering right?
I may just wear them a bit before deciding on tapering. I do need them hemmed though - since there are a bit lighter weight I'm debating making the trek to SELA for chainstitching or just having my local place hem them.
I actually originally wanted the 822 but they were out of stock and, since they aren't extant, I went with the 821 instead.
How much stretch are you getting in these?
-
@Manticore yes railcar fine goods. As for give/stretch, the 21oz is a looser weave and had quite a bit of give compared to he 16oz sbg. It is a tighter weave but a little give. These are the loosest jeans I wear, both versions, so I didnt need any extra room or stretch really. If you ever plan on double duck(I am fortunate enough to have the loom breakers), get a looser fit as they have almost 0 give….wish I gave an extra .25" in all areas.
-
Did anyone ever get around to tapering a pair of these?
