IHSH-99 - Overdyed 17oz Selvedge Denim Shirt/Jacket

[den1mhead]

@Giles - Can you get spare oversized Iron Heart logo'd copper snaps as used on this IHSH-99 - Overdyed 17oz Selvedge Denim Shirt/Jacket ?

The reason I ask is that I'd like to remove the plain snap on the "Snappered mandarin collar" of my IH-9527J and replace it with an oversized Iron Heart logo'd copper snap

[Giles]

I can, but you'll need a press to apply….

[den1mhead]

@Giles:

I can, but you'll need a press to apply….

@Giles - I already have a press kit that came with a set of 15mm (longer post) Heavy Duty Popper Snap Fasteners Press Studs that I retro-fitted to my heavy suede shirt

[HeavyGenes]

Crossing my fingers for a slightly larger 141 in 3XL.

Cheers from the mobile

[pillowPANTS]

I hear you Heavy! Always wanted the 76 or 99 but even in 4X they came up small as an overshirt

[etokle]

Couple of questions on the April re-run:
1. Are these sized up pre-overdye (should I order true-to-size or one-up)
2. Is the thread the same as the original run or more similar to the 141? That high-contrast just kills my interest in the 141 unfortunately (and I'm loving the 140)
Thanks!

Sent from my iPhone using Tapatalk

[Giles]

Check the sizing chart (under "Sizing").  That is the sizing for the last batch, but that is no guarantee that the next batch will size the same.
Should be the same, but we won't know until they come out of the vat.

[organisys]

Living in my 99.

[Aetas]

[davito]

So nice gonna take mine out as well such a great shirt

[davito]

Love this shirt, sorry bad lighting pic

[Aetas]

Who cares about lightning. Great pic @davito . Cuff the arm like you do!

[davito]

Thanks kind Sir ) enjoy your Shirt man @Aetas

[mjn221]

Are these still being re-stocked/re-run?
…If so, any idea when?

Thanks

[Giles]

Yes, soon.  As before we had some damage caused in the od process, we are just assessing the extent of that…..

[Giles]

Limited (and last) restock will go live today….

[Greenie]

will the sizing chart need to be updated for this run or they coming up the same?  How'd they hold up through the dying process this time around?  THANKS

[Giles]

If we had measured them, they'd already be in stock.  i.e. we don't know yet.  They look fine, but I suspect there's the odd blemish….

[Giles]

So we have measured.  There is a little variance from currently published sizing (not much, but enough to warrant a new sizing table).  It will get done later today or tomorrow morning…...

[Giles]

OK.  New sizing….