Iron Heart Belts

[LandoCal126 0]

@Shoreman:

Can the IHB-01 and IHB-02 be cut to a certain size? I'd like to wear these on the middle hole and as such the medium is too small an the large too big.

Yes both the IHB-01 and IHB-02 can be shortened: http://www.ironheart.co.uk/forum/index.php?topic=89.msg2583#msg2583

[Finn666]

I would say yes! since G. once posted images where he said how to cut/shorten a belt to a special length.
on the salephone ATM otherwise I would have quoted that post here…

so ordering a large one would be your best bet I'd say!

[Giles]

It's a piece of piss.  You need a screw driver, a sharp knife and a hole punch or drill…...

[Guest]

@Giles:

It's a piece of piss.  You need a screw driver, a sharp knife and a hole punch or drill…...

ha! In other words, you'd rather not.

[Giles]

I do it all the time.  I over order the XL's and cut to size.  It's a 5 min job….

[Guest]

@Giles:

It's a piece of piss.  You need a screw driver, a sharp knife and a hole punch or drill…...

Ah, so this translates into "it's a piece of cake" around here. Understood.

[Giles]

That is a correct interpretation….

http://www.phrases.org.uk/meanings/piece-of-piss.html

We have piece of cake too, but PoP just has a better cadence to it…..

[Giles]

About time I did this:

[rocket]

very cool…

[LandoCal126 0]

G, great video. Just when I was looking at my belt yesterday to do the same. Looks like it is now time. What is the name of the hole punching tool you use?

[injunjack]

G, you need bigger hammer….

[Giles]

It's a leather punch.  I bought a set of them off the bay:

http://www.ebay.com/itm/New-12pc-Hollow-Punch-Set-Tempered-Steel-Metal-Wood-Leather-Plastic-791LP-/270892255331?pt=LH_DefaultDomain_0&hash=item3f126fc863#ht_521wt_1144

Feckin useful for all sorts of tasks…..

[LandoCal126 0]

@Giles:

It's a leather punch.  I bought a set of them off the bay:

http://www.ebay.com/itm/New-12pc-Hollow-Punch-Set-Tempered-Steel-Metal-Wood-Leather-Plastic-791LP-/270892255331?pt=LH_DefaultDomain_0&hash=item3f126fc863#ht_521wt_1144

Feckin useful for all sorts of tasks…..

Thanks! Now, no one else upbid me.

[jacoavlu]

a drill works fine as well if you don't have a punch. not as clean, but you'll never see it anyway.

[Giles]

@injunjack:

G, you need bigger hammer….

Ah yes, that's what we call A Finnish Screwdriver in the UK…..

[Giles]

@LandoCal126:

Thanks! Now, no one else upbid me.

And if they do:

http://www.ebay.com/itm/12pc-Hollow-Metal-Leather-Punch-Set-Punches-Professional-Wood-Plastic-Gasket-/170764122378?pt=LH_DefaultDomain_0&hash=item27c255b90a#ht_1811wt_1156

[LandoCal126 0]

@Giles:

@LandoCal126:

Thanks! Now, no one else upbid me.

And if they do:

http://www.ebay.com/itm/12pc-Hollow-Metal-Leather-Punch-Set-Punches-Professional-Wood-Plastic-Gasket-/170764122378?pt=LH_DefaultDomain_0&hash=item27c255b90a#ht_1811wt_1156

Knew I should have looked around before blindly bidding. Oh well. Now please, go outbid me guys!

[Giles]

@jacoavlu:

a drill works fine as well if you don't have a punch. not as clean, but you'll never see it anyway.

What I used to use…..

[injunjack]

…and here he goes. I was serious. With bigger/heavier hammer you don't have to pound so much to make a hole with a punch....Oh, well.

BTW do you know what is a Russian Ass-Buzzer like? (I remember you spent time in east block way back then...)

Well.... It doesn't fit in yer ass, and it sure doesn't buzz....

[Giles]

….....does not fit in the ass, and does not buzz.. otherwise works as intended

EDIT: Whoops, you beat me to it....