IH-634S-RAW - 21/23 ounce raw straight cut
-
Damn, we're all going to look like hippies with that calf flare.
haha
mine going in for a superhotsoak (from knee down) in a few minutes…trying to shrink down the inseam length + the hem measurements a bit more...then hotdrying with the hairdryer!
will post measurements in the morning! -
Most of that will go away as the denim loosens up. They don't drape well…
-
There's alot of talk about how much these shrink up after a hot soak.
If I normally wear a 33 in all IH and TW denim, could a 34 work for these?
Also - are people getting alot of inseam shrinking? I am 6'1'' and need the length for stacks,
They look kick ass… love to destroy these..
Thanks
-
There's alot of talk about how much these shrink up after a hot soak.
If I normally wear a 33 in all IH and TW denim, could a 34 work for these?
Also - are people getting alot of inseam shrinking? I am 6'1'' and need the length for stacks,
They look kick ass… love to destroy these..
Thanks
i´d say it´s all about the fit you´re after…
33 would be a good call but 34 will also works...going to be a bit more relaxed i´d say though!
i`m 5'11" and i rock these with a small double cuff so i think the inseam should be good for you as well... -
just oiled the leather patch on my pair…
and since this is the actual jeans thread i thought i should share these pics here as well…
obligatory…
the denim wall (666Sod, 7301S, 634S raw)
presoak pics:
coldsoaking
wood measured to my waistsize…
Here are my measurements…
The presoak ones are almost the same as the sizingchart on the webpage is saying and are more accurate as the postsoak ones since I had to wear'em after the soak to stretch these out and since 23oz isn't nice to fuck with
I'd guess you can take about 3cm from the waist-, 0.5cm from the thigh- and 0.1cm from the kneemeasurements (postsoak!) to know how these cane out of the tub, unworn!
And add 1-2 or a bit more centimeter to the inseam length (cuz of the combs and all that!)… -
Thanks guys…
My 634XHS is a 33 and fits perfectly... definitely like a normal/true waist fit but NOT too tight... and definitely need the total length.
I might pull the trigger on these. Just don't want to have them stretch out too much be ass-saggin' jeans.
According to everything I've read you can expect two inches of shrink in the waist with reasonably easy stretch back to pre-soak state–after roughly a day of wear-- as well as an inch in the thigh and rise and half an inch in the knee and hem.
-
If I've noticed anything about the waist size on these compared to other IH, and as I've seen Giles post, I'm a 31 in everything IH (except the 666SOD which was a 32).
TWR01 -30 (should have gotten 31)
666-XHS -31
666S -31
666Sod -32
IHxB01sbg -31
634SR -31
634S-RAW -31 -
If I've noticed anything about the waist size on these compared to other IH, and as I've seen Giles post, I'm a 31 in everything IH (except the 666SOD which was a 32).
TWR01 -30 (should have gotten 31)
666-XHS -31
666S -31
666Sod -32
IHxB01sbg -31
634SR -31
634S-RAW -31I will live by this grid, as it appears we wear the same size jawnz.
-
Thanks guys…
My 634XHS is a 33 and fits perfectly... definitely like a normal/true waist fit but NOT too tight... and definitely need the total length.
I might pull the trigger on these. Just don't want to have them stretch out too much be ass-saggin' jeans.
like shoreman and dave said…you´ll be fine and the inseam should shrink about 2 inches...
it´s all a matter of soaking though. if you soak pretty hot and let´em dry pretty fast, you´ll get max.shrinkage in any spot.
if you cold soak and let them air dry/hang dry...you´ll have not as much shrinkage as the above solution... -
Here you go guys, as promised! They've stretched quite a bit in the last few days and I'm
planning to get them hemmed as I'm a 30" inseam, these are a 36" and very long on me.
Back side view.Waist is a 34 but has stretched out to a about a 34 1/2, very comfy and buttoning is easy now.
-
if it is the last thing i do i must meet Blackheart in person, just bada$$ through & through.
are the boots pecos?
-
Thanks monday, same goes for me regarding you!
Boots are Red Wing engineers in copper, number 2971
-
you are too kind, boots are a really good look.
