IH-634S-RAW - 21/23 ounce raw straight cut

[Jordan23]

My new trousers!

Sorry for the iPhone-Pics!

[Guest]

Damn, we're all going to look like hippies with that calf flare.

[Finn666]

@Shoreman:

Damn, we're all going to look like hippies with that calf flare.

haha
mine going in for a superhotsoak (from knee down) in a few minutes…trying to shrink down the inseam length + the hem measurements a bit more...then hotdrying with the hairdryer!
will post measurements in the morning!

[dave]

Most of that will go away as the denim loosens up.  They don't drape well…

[georgeel]

A flame…

634SR (that means "S-RAW"...)
634S-RAW

Wich are the best?

I vote 634SR ... 

[GJLW]

There's alot of talk about how much these shrink up after a hot soak.

If I normally wear a 33 in all IH and TW denim, could a 34 work for these?

Also - are people getting alot of inseam shrinking? I am 6'1'' and need the length for stacks,

They look kick ass… love to destroy these..

Thanks

[Guest]

Chop as if you expect to get two inches of shrink with a hot soak.

[Finn666]

@GJLW:

There's alot of talk about how much these shrink up after a hot soak.

If I normally wear a 33 in all IH and TW denim, could a 34 work for these?

Also - are people getting alot of inseam shrinking? I am 6'1'' and need the length for stacks,

They look kick ass… love to destroy these..

Thanks

i´d say it´s all about the fit you´re after…
33 would be a good call but 34 will also works...going to be a bit more relaxed i´d say though!
i`m 5'11" and i rock these with a small double cuff so i think the inseam should be good for you as well...

[seren]

@Shoreman:

Chop as if you expect to get two inches of shrink with a hot soak.

Correct. I measured 2.04 inches of shrinkage. Can't help you with your other question though, GJLW.

[GJLW]

Thanks guys…

My 634XHS is a 33 and fits perfectly... definitely like a normal/true waist fit but NOT too tight... and definitely need the total length.

I might pull the trigger on these. Just don't want to have them stretch out too much be ass-saggin' jeans.

[Finn666]

just oiled the leather patch on my pair…

and since this is the actual jeans thread i thought i should share these pics here as well…

@Finn666:

obligatory…

the denim wall (666Sod, 7301S, 634S raw)

presoak pics:

@Finn666:

coldsoaking

wood measured to my waistsize…

@Finn666:

Here are my measurements…

The presoak ones are almost the same as the sizingchart on the webpage is saying and are more accurate as the postsoak ones since I had to wear'em after the soak to stretch these out and since 23oz isn't nice to fuck with

I'd guess you can take about 3cm from the waist-, 0.5cm from the thigh- and 0.1cm from the kneemeasurements (postsoak!) to know how these cane out of the tub, unworn!
And add 1-2 or a bit more centimeter to the inseam length (cuz of the combs and all that!)…

[Guest]

@GJLW:

Thanks guys…

My 634XHS is a 33 and fits perfectly... definitely like a normal/true waist fit but NOT too tight... and definitely need the total length.

I might pull the trigger on these. Just don't want to have them stretch out too much be ass-saggin' jeans.

According to everything I've read you can expect two inches of shrink in the waist with reasonably easy stretch back to pre-soak state–after roughly a day of wear-- as well as an inch in the thigh and rise and half an inch in the knee and hem.

[GJLW]

Thanks SHoreman - what about the inseam??

[dave]

If I've noticed anything about the waist size on these compared to other IH, and as I've seen Giles post, I'm a 31 in everything IH (except the 666SOD which was a 32).

TWR01 -30 (should have gotten 31)
666-XHS -31
666S -31
666Sod -32
IHxB01sbg -31
634SR -31
634S-RAW -31

[Guest]

@seren:

@Shoreman:

Chop as if you expect to get two inches of shrink with a hot soak.

Correct. I measured 2.04 inches of shrinkage. Can't help you with your other question though, GJLW.

[Guest]

@dave:

If I've noticed anything about the waist size on these compared to other IH, and as I've seen Giles post, I'm a 31 in everything IH (except the 666SOD which was a 32).

TWR01 -30 (should have gotten 31)
666-XHS -31
666S -31
666Sod -32
IHxB01sbg -31
634SR -31
634S-RAW -31

I will live by this grid, as it appears we wear the same size jawnz.

[Finn666]

@GJLW:

Thanks guys…

My 634XHS is a 33 and fits perfectly... definitely like a normal/true waist fit but NOT too tight... and definitely need the total length.

I might pull the trigger on these. Just don't want to have them stretch out too much be ass-saggin' jeans.

like shoreman and dave said…you´ll be fine and the inseam should shrink about 2 inches...

it´s all a matter of soaking though. if you soak pretty hot and let´em dry pretty fast, you´ll get max.shrinkage in any spot.
if you cold soak and let them air dry/hang dry...you´ll have not as much shrinkage as the above solution...

[Blackheart]

Here you go guys, as promised! They've stretched quite a bit in the last few days and I'm
planning to get them hemmed as I'm a 30" inseam, these are a 36" and very long on me.

Back side view.

Waist is a 34 but has stretched out to a about a 34 1/2, very comfy and buttoning is easy now.

[madmonday]

if it is the last thing i do i must meet Blackheart in person, just bada$$ through & through.

are the boots pecos?

[Blackheart]

Thanks monday, same goes for me regarding you!

Boots are Red Wing engineers in copper, number 2971