IH-634S - 21oz Selvedge Denim Straight Cut Jeans - Indigo
-
@cbmyles good to know. I've never had a problem with my front loader on delicate cycle no spin. And I don't pre-soak. So it seems with a top loader that makes a difference.
-
-
Thinking about a pair of these for a change and to embrace a wider leg. I normally wear 777s - has anyone got both sets and could provide any advice about sizing and specifically if I should order some with the same waist size or go up / down one?
-
I don't see why you will want to go up a size on 634's vs 777. Get a pair that the waist starts just a little snug in the beginning and you will be good to go. They have much wider profile than the 777.
-
I was just going to order same waist size - although wondered if this made sense as 634 is a medium rise instead of the 777 low rise so the waist will hit different.
-
@Thor You can order two pairs, try them on and return the one that does not fit to our liking. It is as easy as this!
-
Send a mail to shop@ironheart.co.uk, or start a "Chat".
The CS team know our cuts better than anyone else, period, and answering specific questions like this is part of their job
-
Thanks all - may have to do the dual order. Had hoped to get through to Rivet & Hide but probs wont be for the next few months.
-
Finally gave in and got a pair of 634s. First pair of IH denim. I now see what all the talk is about. What a great fit, great texture to the denim, strangely buttery soft to the touch! The next rabbit hole. I am interested to see how they age :). First if was UHF, then wabash, then shirts, 21oz sashiko,thermals, them type III jacket. Thats how it all begun……
-
-
Heyy, my first 634S and my first IronHeart ever! Really enjoy the tenderness yet strong of the fabric, also functional in cold weather. Love it!
-
This post is deleted!
-
Hi, I am new to the forum - I have been interested in getting a pair of 634s but the inseams currently seem to be around 34” and I think I would need at least a 36”. I have heard that different batches can come in different sizes, is this true?
-
The inseam will stay plus or minus a little bit from what it says in the sizing table.
If you want a longer inseam, then look at some of the other 634 variants:
https://www.ironheart.co.uk/bottoms/IH-634S-18.html
https://www.ironheart.co.uk/bottoms/ih-634n.html
https://www.ironheart.co.uk/bottoms/ih-634s-142.htmlIf, it is specifically the 21oz you are wanting, then look a some other cuts:
https://www.ironheart.co.uk/bottoms/ih-888s-21.html
etc etc etc
You will find more if you look around, but I don't know what you specific requirements are....
-
@Dick-Laurent one thing you may want to consider: are you looking at tag sizes or actual measurements? Take a minute and check out this video on how to measure a pair of denim that fits you and then compare those measurements to the sizing charts:
-
@eemmmiiee true waist is a poor metric to use when sizing. Measure a pair of jeans that fits you, using the IH measuring methods, then base your choice on that.
-
@eemmmiiee with the 21oz, very unlikely to get any noticeable lasting shrinkage. Easily stretches an inch in the waist. If you have a lot of pressure on the waist you could probably get an inch and half of stretch give or take. My 5 year old pair of 21oz waist is 1.5inches bigger than they were originally. I think anything over 1.5inches would be if you were actively/forcibly trying to stretch them.
But as many would say here, shrink and stretch isn't an exact science and everyone's adventure differs. I would plan sizing for about an inch of stretch in the waist. If you don't wear a belt, or have a belly like me exerting force on the waist, maybe plan for an inch and a half. And go off your best fitting jeans measured IH way rather than your true waist as @neph93 recommended
