IHM-37-BLK - Oiled Whipcord N1 Deck Jacket - Black

[Bane]

@IrishHeart hey bud, I need to be in touch with you for sizing of all their tops I just ordered this N1 in XXL and was not sure about the size (I'm also 6’4, but 230), but after reading this I can breathe a bit more relaxed. I think ill be happy in XXL

[Bane]

@Brandrea That’s perfect! Much better than XXL

[IrishHeart]

@Bane I hope this works for you. I’m up to 225lbs and the jacket is still perfect for me.

I bought the olive drab green version and I know measurements can vary slightly between the different colours and updated versions. I don’t know how these compare between the two.

Its well worth pursuing until you get a fit that your happy with because its a fantastic jacket.

Good luck

[Bane]

@IrishHeart I cannot wait to get it. It should be Monday. I’ll let you know how the sizing goes

[zwer]

Logged on after a long time away to say that I have this jacket and it's -20c today in Ontario and I'm still warm. Layered a Uniqlo heat tech long sleeve t and a merino cardigan, and I'm a-okay.

This jacket rules!

[Zeplo1]

I picked up this jacket from a stockist right around the release date. The jacket has been fantastic and I have no complaints. GF mentioned this week that my jacket smells a bit sweaty. I don't recall if I got any care info when I bought it (can't find anything now) and don't see any tags inside on cleaning, so, any recommendations on the best way to clean the interior of this oiled N1?

[AdamJ]

@ShopatIronHeart

[JoshC]

@Zeplo1 Thanks for getting in touch, thats weird that there is no care label on the inside, however I have attached a photo for the care for the the IHM-37 but the Khaki version which will be the same care guide.

If the jacket is getting a bit smelly I would try turning inside out to start with and airing out the jacket, if this doesn't help my next steps would be the following.

Ironing with a one-dot setting typically means low heat, which is important for alpaca or wool-lined items not to get damaged. It is also imperative that you use a cotton cloth to help protect the garment from direct heat exposure, so I would turn the jacket inside out and using your cotton cloth as a thin barrier I would then lightly press the iron against the jacket, I wouldn't recommend gliding the iron over the jacket. Then let the jacket cool down flat to maintain its shape and avoid any distortions in the fabric.

The signs as well going from left to right mean:

1: do not wash
2: do not bleach
3: do not tumble dry
4:Max temp at 110 degree C or 230 degrees F
5: do not dry clean

[Zeplo1]

@JoshC Thank you very much, Josh. I will give these steps a go.

[Ross]

plugin-calendar-event-wrapper:start |||IHM-37-BLK Restock|||

IHM-37-BLK Restock

[[moment:time-date-view, utc, 1765296000000, 1765296300000, false]] UTC
See time in your time zone

IHM-37-BLK Restock

[[calendar:response_no]] [[calendar:response_maybe]] [[calendar:response_yes]]

[[calendar:response_yes]] 9

[[calendar:response_maybe]] 0

[[calendar:response_no]] 0

plugin-calendar-event-wrapper:end

[AdamJ]

[Dr. Shafty]

Soon....

[yoojimbo]

Hype!

[cjayk]

Sorry if this is a really annoying question (new here), will a sizing chart be added to this post before the launch or should I keep an eye on the item page on the website for the sizing chart?

[SamD]

@cjayk Welcome! Yes, we'll add the sizing chart to the first post once this run of jackets has been measured. Keep an eye on the thread for updates a few days before launch

[cjayk]

Awesome, thanks @SamD

[Domi]

Can't wait for it.

Still a little on the fence regarding sizing. L would probably provide a good fit on sleeves and length, but seems far too snug for me on chest and shoulders. Guess I have to ask the team for an XL with shorter sleeves.

But if I see it correctly, the sleeve length on N1s is measured including the storm cuffs ?

[Ross]

@Domi Yep, sleeves are measured from shoulder to the end of the cuff (the actual storm cuff is tucked inside).

[Ross]

Sizing chart has now been updated in the first post.
Please be aware you may not be able to view the product’s website page leading up to launch, as it will be briefly offline whilst we prepare for the release at LIVE on Tuesday 9th December at 1600GMT

[JonR]

Hello all. I have a question for N1 owners out there. Can you share your experience with the wool/alpaka lining. Read somewhere that after awhile the volume decreases after breaking in the jacket. I guessing giving a little more room. Is that right? How long does that take for the fur to loose it's unbroken in state (having a hard time describing this but when the fibers are still straight and very fluffy when it's brand new) and become more matted and curly with use and time?
Thanks hope that's clear. Have posted a example picture for reference.