WESCO-MRLOU-BLK - Wesco® - 10" Horsehide Pull-On "Mister Lou" Engineer Boot - Black
-
@injunjack Shouldn't be too far in the not so distant future. What size were you looking for in an E width? I can see if what Wesco have available at the moment.
-
@injunjack Ill get back to you when they wake up on the West coast.
-
Sorry @Chesson, in the brown misterlou thread you mentioned a chromexcel version – didn't realize it only applied to the brown misterlou. So will the black continue to be provided in horsehide even though no restocks are indicated? And I guess my question still stands, will the brown version be available online anytime soon?
-
I've had my eye on these for a minute, looks like the perfect engineer boot. Are these built to the same specs as the Mr. Lou sold on Wesco's website? Also curious if it's it possible to get these in any widths narrower than D, Wesco only lists D and E as well.
Wesco do batches of the Mr. Lou and sell them through the website to partner retailers. The principal design is the same in terms of the last used, toe shape, heel cup, stitching etc. some details may change between batches, most obviously the leather.
I suspect they make batches in D and E widths as they are the most common. However Wesco do a full custom service and it should be possible to get a custom version with a narrower footbed.
I’d recommend emailing Giles, Alex or Chesson to discuss it. Living in Europe as I do, it is easier and less costly to arrange custom builds through them.
-
Crap, took my eyes my email for another day and it seems I already missed the restock didn't I?
Skickat från min LYA-L29 via Tapatalk
-
Crap, took my eyes my email for another day and it seems I already missed the restock didn't I?
I don’t think so…
-
The incoming end of summer sale has rekindled my interest in picking up a pair of these. Initially, width was a bit of a concern as I have quite narrow feet. Reading through this and other threads the consensus seems to be that the MP last runs quite narrow, so D width may actually be adequate.
However, I'm still uncertain on how to size for length. I did have a pair of Red Wing IRs in size 11D which were probably about a half size too big although they still fit comfortably. My standard sneaker size (and Brannock measurement) is generally 12. The only comparable pair of boots I currently own is a pair of Nick's custom work boots, but their sizing philosophy seems to differ from Wesco's a bit. Nick's is very insistent on sizing up .5-1 in length to ensure adequate toe room as your foot tends to "stretch" out a bit after wearing high arch work boots for an extended period of time. This placed me in whopping 13A in their boots which are incredibly comfortable, however I find the extra toe room a bit cumbersome for casual wear. I should also note that I owned a pair of Chippewa engineers some years ago that were a 10.5E (sized down to compensate for additional width) that were too tight in the toe box to wear comfortably but otherwise fit quite well.
All of this is to say, should I order true to size or treat them as Red Wings and size down? I would like to take advantage of the sale to pick a pair of these up if I can. Otherwise, ordering a custom pair may be the way to go.
