IH-888S-21 - 21oz Selvedge Denim Medium/High Rise Tapered Cut Jeans - Indigo

[spitfiredealer]

[emoji1374][emoji1374][emoji1374]

Sent from my iPhone using Tapatalk

[riffblaster general]

has anybody done a side by side comparison with a 633?

[motojobobo]

@riffblaster:

has anybody done a side by side comparison with a 633?

Excellent question. I too look forward to the comparison.

[BrettD]

Picked up a pair of 36's yesterday  from Mildblend in Chicago and had them hemmed to 31". Im short and fat. They feel perfect everywhere and will be really nice with some stretching in the top block.
Question though. The leg opening is close to 9" anyone have any advice on how to shrink the legs below the knee? I wish they had just a little more taper. If I was taller it wouldn't be a problem as they tapered more but i had 4-5" cut off the length.

Oh and my truck got towed while I was there. 45 minutes. These are now a 875 dollar pair of pants with my tow bill.

[Filthy2123ozjunkie]

@BrettD Your jeans are Ultra Heavy Raw? You can get about .75 inches of shrink with some boiling hot water if you just soak them  below the knee… I mean don't even touch the part above the knee with water.

The 21 oz denim won't shrink at all.

[neph93]

@BrettD:

Question though. The leg opening is close to 9" anyone have any advice on how to shrink the legs below the knee?

The 21oz denim will not shrink I'm afraid.

[Filthy2123ozjunkie]

Oops sorry IDK where I got uhr from… my bad...

@neph93 I have uhr on the mind and I'm a little tipsy at the moment.

[Filthy2123ozjunkie]

^plausible deniability 

[BrettD]

@Filthy25ozJunkie:

@BrettD Your jeans are Ultra Heavy Raw? You can get about .75 inches of shrink with some boiling hot water if you just soak them  below the knee… I mean don't even touch the part above the knee with water.

The 21 oz denim won't shrink at all.

Thanks.

Ill wear them for a bit and see if they grow on me. If, maybe Ill send them to Railcar or somewhere and have them tapered below the knee.
I feel like a priss right now. I really wanted these pants for all the room in the top block. I bought some Naked and Famous easy guy pants recently because of the top block room and high rise. They are almost too big in the top and taper too much. These are perfect from the knee up but just a little big on the opening for my tastes…

Still so nice!!!

[Matty123]

@BrettD

You should send the to railcar for the taper. I sent my 634s to them for a full
Leg taper and they did a great job.

[Filthy2123ozjunkie]

@BrettD just go for some cuffs. I personally love them!

[neph93]

@Filthy25ozJunkie:

^plausible deniability 

Good on you dude, enjoy [emoji1][emoji482]

[Appfaff]

@riffblaster:

has anybody done a side by side comparison with a 633?

Here is the 633-14 in a size 36 compared to the 888s world tour jeans sz 36 (yes the tour jeans are a bit larger in the thigh than the production run, but close enough:

Sent from my iPhone using Tapatalk

[Matty123]

The backrise on the 888 is about an inch higher than the size chart suggests? Is that just the world tour pair or through out. I was hopping the 888 BR would be what the size chart states

[Appfaff]

I can only say what the World Tour pair measures, and I always trust the IHUK crew on their measures. However, there may always be a bit of variation between pairs.

Sent from my iPhone using Tapatalk

[Megatron1505]

The WT jeans were before measurements were tweaked. I would use the IHUK table for the standard measurements.

[Matty123]

thanks guys.

[manufc10]

Just need to bump this thread and tell the world how good this cut is.  This 888 cut…right here...money.    It really needs to be made in many fabrics.

[RockScola]

Will these be made in your super black or sbg denim? Will the super black denim be selvedge and 4 buttons?

[neph93]

They are getting made in 21oz OD. No news on plans for SB or SBG, but I can tell you that SBG is selvedge, SB isn’t, and this cut will always have the extra button.