Time For a New Jeans Cut….

[Dion]

Brilliant! Really looking forward to this project!

[ROman]

Sounds good to me.

[Giles]

@FurattoHeddo:

So basically 633 cut with a bit more rise, or am I missing something? @Giles

It's a 634 with higher rise and more taper….

[Jordan23]

Yes[emoji1319]

Enjoy ya addiction!

[Anesthetist]

@Giles:

@FurattoHeddo:

So basically 633 cut with a bit more rise, or am I missing something? @Giles

It's a 634 with higher rise and more taper….

I'm a little confused as well as I thought the 633s IS a 634s with a little taper from the knee down. Anyway you look at it, a little more rise sounds like a win.

Sent from my iPhone using Tapatalk

[Giles]

The 633 is a 634 with more taper from the knee.

[Dion]

This cut sounds like a future bestseller.

[Megatron1505]

As we envisaged it, the taper will start slightly above the knee and the rise will be extended. It's a mid cut between the 634 and the slimmer cuts, classic yet modern.

When you look at the range of cuts currently available, which is already fantastic, it is the only gap really.

[neph93]

@Megatron1505:

As we envisaged it, the taper will start slightly above the knee

Excellent. That would be best to my mind.

@Megatron1505:

When you look at the range of cuts currently available, which is already fantastic, it is the only gap really.

For sure. And a great replacement for (and again to my mind an improvement on ) the out-going BB's.

Re. the 633 comments, that is a US (SE?) exclusive cut. I would imagine this will differ from it in the same way the 777's differ from the 301's. I'm very excited at any rate.

[browniemcghee]

Wow.  This is good news.  I am also in the large thighs camp, so I'm hoping the thighs are more 634 than 633. Sounds like a perfect cut.

[FurattoHeddo]

@Megatron1505:

As we envisaged it, the taper will start slightly above the knee and the rise will be extended. It's a mid cut between the 634 and the slimmer cuts, classic yet modern.

When you look at the range of cuts currently available, which is already fantastic, it is the only gap really.

OK, thanks for explaining.

[Megatron1505]

The 633 is an SE exclusive, this cut will not be related to the 633 other than both made by IH. Higher rise, different taper and thigh measurements is the current concept (subject to tweaking and amendment  ;))

[Peterpiper]

How would it compare to the beatle buster?

[FurattoHeddo]

More room in the top block than BB I imagine…

[Seul]

And hopefully a slightly smaller legopening…

[Dion]

I hope the thighs will be more 634 like.

[David K.K. Hansen]

I'm quietly hoping the thighs are more akin to the 1955 than the 634 

[Megatron1505]

All will be revealed…...

[tmg]

Sounds perfect!

[spitfiredealer]

Right so all I need to do to get the Sherpa lined trucker jacket made is get Giles drunk! Why didn't someone tell me this before!