Rivet and Hide

[Danny RnH]

Blaming this error on our recent move to a full brick and mortar store but we discovered the new long-sleeved summer border shirt in blue from The Flat Head was showing out of stock. Now corrected.

http://rivetandhide.com/brands/the-flat-head/tfh-block-check-l-s-workshirt-blue.html

[Graeme]

Danny's put up one of the Wes Lang blankets up on the wall at Rivet and Hide!

No, it's not for sale.

[Danny RnH]

We are opening tomorrow Bank Holiday Monday 1200-1700

[Finn666]

that blanket design would make a nice tattoo

[Danny RnH]

We now have some incredibly soft loopwheeled V neck t shirts from Iron Heart in Navy, Green, and Grey with pocket.

7.5 oz 100% cotton from Wakayama and made in Tokyo itself.

They have been washed once so minimal shrinkage. They run about an inch longer than previous versions.

http://rivetandhide.com/brands/iron-heart/ih-plain-loopwheeled-v-neck-t-shirts-navy.html

http://rivetandhide.com/brands/iron-heart/ih-plain-loopwheeled-v-neck-t-shirts-grey.html

http://rivetandhide.com/brands/iron-heart/ih-plain-loopwheeled-v-neck-t-shirts-green.html

[Graeme]

I'd just like to thank Junior for modelling pinnies for me today. As a result I picked up a very nice Dawson Denim apron as a present.

Kelly and Scott make fine denim goods, and are lovely people too.

[Danny RnH]

Beatle is helping us out at the store today and Saturday so if you fancy stopping by meeting her then all welcome

[Graeme]

I dropped by Rivet and Hide to say hello to @Beatle and was Shanghaied into trying on the Flat Head 3012 jean so that they could see what they're like.

The jean fitted a bit like the 1955, but in a lighter fabric. Sorry, I didn't get any pictures. But they're long enough for @tatmantall with a 39.5" inseam when raw.

One of Danny's customers dropped by on a very cool Harley, which he parked outside. I did get a photo of that.

And Beatle's feet are nowhere as big as mine! :o

[tatmantall]

Thanks for the heads up Graeme. Curiosity killed the cat so I just sent R&H a email

[grandmasterben]

Tat, if you get all the shrinkage out, it's going to end up at 36.5 or 36.

[Graeme]

They're quite big in the thigh, but I tried on a pair of 36s, and I think that you're a few sizes smaller than me. Plus there'll be some shrinkage.

I did like them. Will probably get a pair when my weight stabilises.

[tatmantall]

Whoa, yeah if they shrink up that much won't workout… I'll talk with them when they get back with me and see what they expect on that... Not even positive it's a cut if be interested in.. Just will depend in what the measurements look like at my size

[Graeme]

I've got pretty big thighs, and I had quite a lot of space in the pair I tried on. You could spend a lot of time doing squats and deadlifts at the gym, and still not fill them out.

A bit of shrinkage would help for me. I don't know how it would go for you, but the cut would work for someone on the bulkier end of the athletic spectrum.

[tatmantall]

Yeah… He got back with measurements... Not gonna work and would shrink too much anyway

[Danny RnH]

The 4002 is a slim tapered raw selvedge jean by The Flat Head. It is the same fit as the popular 3002 indigo jean.

A mixture of sulphur and indigo dyes gives the jean a black appearance but allows it to fade with high contrast just like the indigo denim does, along with the characteristic vertical falling.

This denim shrinks less than the 3xxx/Pioneer denim. It will lose 1" in the waist and stretch back out by 1".

The deal breaker for some will be the 38" inseam which after hot washes will lose just 2".

-100% cotton 13.5 oz black denim
-raw/unsanforized
-Slim tapered fit
-Hidden rivets
-chain stitched hem
-38" inseam
-Zip Fly

The Black Border T Hhirt is a new addition. It comes up pretty small. Junior wears an L in this image and a 40 in the THC tees. The smaller tees would work well on some female customers.

http://rivetandhide.com/brands/the-flat-head/tfh-4002-slim-tapered-black-jean.html

http://rivetandhide.com/brands/the-flat-head/the-flat-head-border-t-shirt.html

We also now carry the 3012 straight jean with sharp taper to narrow leg opening made from the 3XXX denim.
It comes with a generous 39.5" inseam which will reduce to 36.5" after soaking.

-14.5 oz. 100% cotton selvedge denim
-Raw/unsanforized denim
-Straight tapered fit
-Flat Head & Co branded iron buttons
-Hidden rivets
-Button fly
-39.5" raw inseam measurement
-Goat leather patch
-Crafted in Japan

We shall to provide some fit images next week.

http://rivetandhide.com/brands/the-flat-head/tfh-3012-straight-tapered-jean.html

[Finn666]

really looking forward to the 3012 infos!…

[beautiful_FrEaK]

measurements and stuff is already up:

http://rivetandhide.com/brands/the-flat-head/tfh-3012-straight-tapered-jean.html

[Max Power]

Would love to see a fitpic. The measurements look good, though the taper appears to be really dramatic.

[Danny RnH]

@Max:

Would love to see a fitpic. The measurements look good, though the taper appears to be really dramatic.

James, my 189 cm model is very inconveniently on honeymoon on some remote Malaysian island with his beautiful wife Florence the florist until June 3rd. I told him I have 39.5" length Flat Heads to be modelled but he refuses to cut it short.
With the length and silhouette Junior (173cm/65kg) looks like a denim c lown in this fit. A friend of the store (190 cm)  is stepping in next Saturday so hopefully if the photos work out I'll have fit images by then.

[Max Power]