White's Boots
-
-
@bl@ster:
Yo Salami, what leather is that? Can you post the full specs?
not ss but here you go lad:
Counter Leather Dark Brown French Calf, Celastic Toe Box Single Celastic Toe, Height 6", Midsole Double, Heel Base Standard, Last Semi Dress (Bounty Hunter), Steel Toe No Thanks, Upper (Shaft) Leather Dark Brown French Calf, Toe Cap No Thanks, Toe Vamp Leather Dark Brown French Calf, Top Rolled Top, Hardware Brass Eyes & Hooks, Leather Liner Brown, Pull Loops Leather Pull Loops, Size - Width D (medium), Lace Design Plain Toe, Sole Vibram Composition Half Sole, Toe Cap Leather Color Does not apply, Edge Brown, Heel Lifts Standard, Size - Length 7
-
I wear same size in redwings and Whites
-
I don't own a pair of Red Wings, but before I bought my Alden Indy's I tried on a pair of the Beckman boots. I didn't buy the Red Wings b/c the width was too tight, and sizing up just made the boot too long. I ended up buying a pair of Indy boots in 8E. I ordered my White's in an 8E also, and they're basically the same fit as my Indys.
-
^ if it's a 9US you take in RW I'd go with an 8.5 or 9E in the SD last, an 8 might be too snug with thick socks.
Anyone has any inputs? Would a 9E fit? My feet measures a EUR42 on a brannock device by Birkenstock from what I remember.
I wear 13D in Red Wing boots - and I measured my foot for White's, and Baker's suggested 12.5D (that is what I ordered, in a bounty hunter). I will see how that works out very soon.
"If" Red Wing made a 12.5D that might work for me - the boots are roomy.
-
I wear a 10D in Red Wings with thick socks and still have a little room but 9.5D fits good and snug with thin socks. A 9.5D in White's SJ's and Packers works great for me so you should be good.
-
By the way a question to all:
We are talking always about lace-up-boots only, but has anyone experience with custom made pull-on-boots? Especially about the fit?
If I could find a good custom made rugged Chelsea boot I'd be all over it. I just go back and forth between my rw Chelsea's and my blunnies.
-
Shipping email from Bakers, fuck yeah.
-
By the way a question to all:
We are talking always about lace-up-boots only, but has anyone experience with custom made pull-on-boots? Especially about the fit?
I recall there is at least 1 pic of a White's "Nomad" in this thread - it is White's "engineer" style pull-on boot - in nat. cxl that was really nice - I even printed it off for future reference. It would be a chore to find it, but it is there. I have no personal experience with this style, but I can tell you it is a really handsome boot.
Personally I would be a little scared to buy the Nomad, as I have a high instep, and in the past I have had a hard time getting "engineers" on my feet. I can usually do it but it's like wrestling an alligator. I actually gave away a pair of Frye's to my nephew because it was just too much.
- should arrive monday. Finally get to see a pair live, not just pics - oh yeah and wear them too - what a concept!
