IH-666SB - Superblack Devil's Fit

[hajduk]

@Giles:

And the order has gone into Haraki….....

Red W and red outseam whipping (so like the Devil's Ducks)

If you don't like red, get a Sharpie.....

@hajduk:

GREAT!
all all black like the 9634?
i hope yes!

G, the 666 as the perfect boots bottom, cuffing and boots works very well together.
so a red outseam whipping on for ex. black engineers boots is a bit too much in my opinion.
but oh well…bottoms can be hemmed! ::)

[Giles]

Black Sharpie…..

[hajduk]

ok! moi comprendre maintenant!

[hajduk]

and G, no thanks about this
some people believe this…
but thanks to your irony!
@Giles:

Coming soon to a website near you.

The IH-666SB, yes the Devil's Fit in Superblack.

Thanks for the idea hajduk.

[Seul]

Getting excited… 

[Giles]

We've decided we need to do a sample before we go to production….

[Seul]

Spec'ed after the 666S?.. Assuming so, just wondering…

[Giles]

Yes, but we want to sample first

[MikeC]

I agree with sampling first, good call.

[elclintor]

dibs on the sample.

[Giles]

First sample….

[Seul]

Red W! RED W! So fucking stoked on these…

[hajduk]

and the patch G?
red and black, possible?

[Giles]

Measurements of this sample pair of 34 are almost exactly the same as the 34 here.  Good job Tom….

[Giles]

@hajduk:

and the patch G?
red and black, possible?

No.  The patch will be the normal leather.  But we have an issue.  At the moment the patches say 18oz, so I am going to get a new batch run which are more generic.  In place of the 18oz, we can either have a blank space or "Heavy Ounce" (which is the way Haraki refers to heavy denim and gets my vote.  Thoughts….?

[Finn666]

"heavy ounce" better than blank space so yeah, gets my vote as well! don't forget to add a "B" to the 666S though

[hajduk]

G, the measurements are the defintives one?
minus 2 inches from the knee to the hem…?

[Giles]

That is a pic of the 666S.  The patch on the 666SB has not been imprinted with lot number or size…..

[hajduk]

@Finn666:

"heavy ounce" better than blank space so yeah, gets my vote as well! don't forget to add a "B" to the 666S though

same here

[Giles]

I will talk to Tom and H about whether we need to further refine the measurements before production.  Are you asking length of inseam?  It is currently 37, but I will likely reduce that to 35 or 36..