Random questions to which you seek an answer
-
21oz would likely be too thick and stiff anyway. Would be very uncomfortable and almost impossible to sew. You have to hold in the sleeve about and inch or so to fit the arm hole. That would be very difficult with such a stiff material. The only way to do it would probably be to work with the little bit of diagonal stretch you have in the denim. But that would then throw off the fit of the rear shoulder. So the 13.5 oz is indeed the better choice. Consult with your tailor before ordering.
Till
-
broken twill example
Wrangler, don´t even know how old they are now..
We can do anything
http://bybeatle.com -
-
@danbin:
Excuse my ignorance or if answer if already. Is there anything in between IH301S and IH634S? Wanted something around ~8" leg opening. Would the 634S shrink a little with a hot soak? (I would be buying size 30). Thanks in advance all.
I'm going to throw this out there and guess. The SEXIH07 line, made by Kiya (Self Edge). Unfortunately, SESF is sold out ! You can call SENY though – they may have your size. As DougNg says, the cut of these are PERFECT for those who find 634S a bit wide and 301S too skinny. Don't forget 461S though...IMHO, they're just as skinny as 301S except they flare a little at the bottom.
Oh almost forgot to mention -- 634S barely shrink at all. Don't count on shrinkage for any IH "S" varieties...if they shrink a little, they'll stretch right back out after 2 weeks of wear.
-
Danbin. No intermediate currently, but watch this space. I have been hard at work over the past couple of days (with a little bit of help from my friends) designing the next 2 special releases. One will be a super-duper limited edition, one will be a regular addition to the range.
And no, I don't have release dates yet :), and yes that is all I can tell you at the moment
…G
-
-
crazy question
what would the likely hood be of being able to get fabric samples to favorite customers on items that are coming down the pike? you have a few folks that are really dedicated & push the brand better than any PR folks you could pay for. not sure how expensive samples are & of course you wouldn't want to put them out too far in advance, but you could even offset the cost by charging a fee for them & build incredible buzz by having your chosen few select the patterns/designs/etc.
just a suggestion/question & i hope i posted this in the correct section :-\
-
the 634sr
http://www.selfedge.com/shop/index.php?main_page=product_info&cPath=71&products_id=468They pretty much explain themselves dawg…
-
Arcuates.
Selvedge detailing.
Were you looking for a bigger diff? Its an anniversary ed of their most popular cut done up with some bells and whistles. Aside from what you mentioned, I don't think there is much else. Giles? Any extras? -
post in for sale simon…
