IH-634S-RAW - 21/23 ounce raw straight cut
-
Just a word of caution when using tools to help button for the first time:
I used a screwdriver to help loosen the buttonhole on a pair several months ago, but later found that I had nicked the thread on the buttonhole stitch which eventually began to unravel. I had to hand-sew a new buttonhole.
Just sayin', Good luck and Happy wearing to all…
-
how long should i soak them btw.?
30mins should be enough to bed in the contructional stitchings right?
Yes, and just remember, it is the drying process that does as much shrinking as the soaking. So if you want to retard shrinkage, dry them slowly, if you want mega shrinkage, put the on the hottest radiator you can find…...
-
G is right, fast hot drying will cause major shrinking ( radiator, dryer ) so be careful…
Drying them in a warm room ( I used the kitchen ) I found worked the best. -
Good luck Finn, I shall face the same challenge when I get home.
-
G is right, fast hot drying will cause major shrinking ( radiator, dryer ) so be careful…
Drying them in a warm room ( I used the kitchen ) I found worked the best.I second G and BH…. If Less shrinkage I air Dry, if I want more shrink I hot dry....
My new denim suit should be with me next week...... 634sRaw and IHSH-45. Wanted the IHD-01 but I did not have the funds.
Tinman from iPhone
-
Try buttoning several times while not wearing to loosen the holes a bit. Make sure you pee before putting them on.
-
Try buttoning several times while not wearing to loosen the holes a bit. Make sure you pee before putting them on.
done and done… thanks
