IHWE-PO - Iron Heart Int'l x Wesco® - 8" Rough-Out Burlap Pull-On Boot

[marlin]

Love them!

[robm]

Any idea on the timescale for the restock of these?

[Giles]

None, but if you know your size, we can get a pair made for you.

[robm]

Good to know Giles, thanks.  I need to settle on my Wesco sizing first but once I'm happy with this, I'll be able to order.

[Dstauffer]

@Giles:

None, but if you know your size, we can get a pair made for you.

Hey G, I am in talks with Chris over at wesco about getting a pair of these made with a 10 inch height and some cinchers at the top (like an engineer style at the top).

He said he had to check in to see if they had the material to make the heels….do you know if these require something special for the heel?

[Giles]

The heel rubber is very thin on these boots, much thinner than their normal heel rubber.

[Appfaff]

I just keep staring at the last remaining pair…on sale...in my size... taunting me.

Last year I bought the rough out engineers as a "concession" to not being able to swing the cost of these. Now there they are, reminding me that immediate gratification is a bittersweet pill...

On a side note... anyone know if these run wider than the standard 1950s engineer cut?

[Chesson]

Hey @appfaff

The IHWE-PO is built on the #65 which compared to the majority of the other lasts runs about 1/2 a size larger in the length. In regards to width on the #65 it very similar to the MP95 which across the board feels very standarised, apart from the heel pocket which is slightly wider. When compared to a 1950's cut I couldn't tell you, I would have to have a word with @Chris at Wesco who may be able to shed some light here…

[Appfaff]

Thanks @Chesson - the way my enabling mind read this was: these are the same if not a little larger than the 1950s engineer with MP toe…

That makes resistance even more difficult!

[neph93]

@Appfaff:

That makes resistance futile

The Borg fixed that for you…

[Appfaff]

Proper fix good man

Sent from my iPhone using Tapatalk