WESCO
-
@Aries What they said - great style and great boots!
-
Thanks guys; boot is a bit tight on the left big toe (left foot bigger than right), but I’m sure given a few weeks it’ll loosen up.
-
Those look solid dude - glad the sizing worked out!
Sent from my iPhone using Tapatalk
-
What everyone else said. Seriously awesome.
-
Thanks folks!
-
Does anyone remember where that Wesco
Size chart is? The one from bigblackboots.com -
Does anyone remember where that Wesco
Size chart is? The one from bigblackboots.com -
That’s the one. I was referring to where I saw it in this forum before. I measured my foot today and had some questions. I’m an 11EEE according to that size chart.. I’m Wondering if anyone else with Wesco boots finds the cart accuratez
-
That’s the one. I was referring to where I saw it in this forum before. I measured my foot today and had some questions. I’m an 11EEE according to that size chart.. I’m Wondering if anyone else with Wesco boots finds the cart accuratez
The Boot I got today is 9.5D and that is pretty much exactly what the Chart says.
-
That’s the one. I was referring to where I saw it in this forum before. I measured my foot today and had some questions. I’m an 11EEE according to that size chart.. I’m Wondering if anyone else with Wesco boots finds the cart accuratez
The Boot I got today is 9.5D and that is pretty much exactly what the Chart says.
I used that size chart before I bought my Jobmasters and find it accurate.
I may have mentioned this before but Kyle at Bakers boots told me that not all of Wesco’s lasts are standardized. For the standard Jobmaster last (9165) or bump toe last (9109), the chart works great. Kyle also mentioned if you are thinking of going with the MP last he said to size down 0.5 size FWIW.
-
Thanks everyone
-
That’s the one. I was referring to where I saw it in this forum before. I measured my foot today and had some questions. I’m an 11EEE according to that size chart.. I’m Wondering if anyone else with Wesco boots finds the cart accuratez
The Boot I got today is 9.5D and that is pretty much exactly what the Chart says.
I used that size chart before I bought my Jobmasters and find it accurate.
I may have mentioned this before but Kyle at Bakers boots told me that not all of Wesco’s lasts are standardized. For the standard Jobmaster last (9165) or bump toe last (9109), the chart works great. Kyle also mentioned if you are thinking of going with the MP last he said to size down 0.5 size FWIW.
This is something that is giving me trouble. I have heard to size down .5 for the MP but in practice I rarely see it done without removing the sock liner or in cases of people with odd sizing. I've also seen side by side pictures of an MP wesco and a 2030 Viberg that was a half size smaller and they looked the same, maybe even a bit shorter than the Viberg.
-
yeah I would be leery of sizing down with the MP toe- of course it depends on the last & he's the expert.
-
That’s the one. I was referring to where I saw it in this forum before. I measured my foot today and had some questions. I’m an 11EEE according to that size chart.. I’m Wondering if anyone else with Wesco boots finds the cart accuratez
The Boot I got today is 9.5D and that is pretty much exactly what the Chart says.
I used that size chart before I bought my Jobmasters and find it accurate.
I may have mentioned this before but Kyle at Bakers boots told me that not all of Wesco’s lasts are standardized. For the standard Jobmaster last (9165) or bump toe last (9109), the chart works great. Kyle also mentioned if you are thinking of going with the MP last he said to size down 0.5 size FWIW.
This is something that is giving me trouble. I have heard to size down .5 for the MP but in practice I rarely see it done without removing the sock liner or in cases of people with odd sizing. I've also seen side by side pictures of an MP wesco and a 2030 Viberg that was a half size smaller and they looked the same, maybe even a bit shorter than the Viberg.
Interesting and good to know. I’m getting the feeling that Kyle at Bakers tends to size people on the tighter side. He advised me to take a half size smaller on my Jobmasters but I went TTS from the chart on bigblackboots.com instead and I’m glad I did. I have sized down too much on certain boots in the past and was trying to avoid that for my Wescos. BTW, I’m a 10 in Viberg and 11 in Wesco.
-
the MP toe is narrow to begin with, if you sized down you might be pinched length and width. I'm normally a D but if I order another MP toe I'm going to E.
-
I am slowly inching up on getting a pair. To be honest, getting the sizing right is slightly stressful. Question: what size are in Red Wings or Vans?@spacecadet:
That’s the one. I was referring to where I saw it in this forum before. I measured my foot today and had some questions. I’m an 11EEE according to that size chart.. I’m Wondering if anyone else with Wesco boots finds the cart accuratez
The Boot I got today is 9.5D and that is pretty much exactly what the Chart says.
I used that size chart before I bought my Jobmasters and find it accurate.
I may have mentioned this before but Kyle at Bakers boots told me that not all of Wesco’s lasts are standardized. For the standard Jobmaster last (9165) or bump toe last (9109), the chart works great. Kyle also mentioned if you are thinking of going with the MP last he said to size down 0.5 size FWIW.
This is something that is giving me trouble. I have heard to size down .5 for the MP but in practice I rarely see it done without removing the sock liner or in cases of people with odd sizing. I've also seen side by side pictures of an MP wesco and a 2030 Viberg that was a half size smaller and they looked the same, maybe even a bit shorter than the Viberg.
Interesting and good to know. I’m getting the feeling that Kyle at Bakers tends to size people on the tighter side. He advised me to take a half size smaller on my Jobmasters but I went TTS from the chart on bigblackboots.com instead and I’m glad I did. I have sized down too much on certain boots in the past and was trying to avoid that for my Wescos. BTW, I’m a 10 in Viberg and 11 in Wesco.
Sent from my SM-N950U using Tapatalk
-
I am slowly inching up on getting a pair. To be honest, getting the sizing right is slightly stressful. Question: what size are in Red Wings or Vans?@spacecadet:
That’s the one. I was referring to where I saw it in this forum before. I measured my foot today and had some questions. I’m an 11EEE according to that size chart.. I’m Wondering if anyone else with Wesco boots finds the cart accuratez
The Boot I got today is 9.5D and that is pretty much exactly what the Chart says.
I used that size chart before I bought my Jobmasters and find it accurate.
I may have mentioned this before but Kyle at Bakers boots told me that not all of Wesco’s lasts are standardized. For the standard Jobmaster last (9165) or bump toe last (9109), the chart works great. Kyle also mentioned if you are thinking of going with the MP last he said to size down 0.5 size FWIW.
This is something that is giving me trouble. I have heard to size down .5 for the MP but in practice I rarely see it done without removing the sock liner or in cases of people with odd sizing. I've also seen side by side pictures of an MP wesco and a 2030 Viberg that was a half size smaller and they looked the same, maybe even a bit shorter than the Viberg.
Interesting and good to know. I’m getting the feeling that Kyle at Bakers tends to size people on the tighter side. He advised me to take a half size smaller on my Jobmasters but I went TTS from the chart on bigblackboots.com instead and I’m glad I did. I have sized down too much on certain boots in the past and was trying to avoid that for my Wescos. BTW, I’m a 10 in Viberg and 11 in Wesco.
Sent from my SM-N950U using Tapatalk
I have a pair of Redwings in 10EE but the fit isn’t great. Maybe a 10.5D would have been better. Not really sure since I haven’t tried that. Don’t have Vans but I’m 11.5 in Nike/New Balance. 11 in PF Flyers. 10E in Alden Trubalance/Barrie. 10E in White’s semidress but think 10.5 might be better for a longer arch length.
-
Thanks!
Sent from my SM-N950U using Tapatalk
-
the MP toe is narrow to begin with, if you sized down you might be pinched length and width. I'm normally a D but if I order another MP toe I'm going to E.
There's an MP 1339 last which runs narrow and an MP95 last that actually runs wide, but 99% of motor patrol boots I see are 1339.
For now I'm planning on going true to brannock size on my foot patrol. I figure if it's a bit big I can use a thicker insole and get long laces to tie around the ankle.
