The (Less intimidating) Watch Thread
-
No worries @neph93:
-
The bezel is the ring around the crystal on the front of the watch. On the Rado, above, it's the bit with the triangle, 15, 30, and 45 on it. It can be rotating (as above) or fixed.
-
The crown is the winder, which is typically on the right hand side of the watch.
-
The movement is the mechanical gubbins that you find inside the case.
Hodinkee have a Watch 101, which lists all the important terms.
-
-
@UnTucked there are ultra-thin watches, which will slip under your cuff. This is the profile of the very expensive Bulgari Octo Finissimo, which is 5.15 mm (about 1/5") thick.
More sensibly, a dress watch will be slimmer than a diver. The Hamilton Intra-Matic and Tissot Ballade Powermatic are around 10 mm (2/5") thick.
A manual watch, where you need to wind the crown to power it, will often be slimmer than automatic, which is wound by your motion. These use a rotor, which is the semicircular piece of metal you can see on top of the movement, and this adds a millimetre or two to the thickness.
-
I'll have to spend some time trying watches on…
My Maranez measures in at 13.7mm thick, and though I love the look of this watch, it's not "practical" with my long sleeves shirts. But, 5.15mm sounds like the exact opposite end of the spectrum, lol! The Hamilton that I'm leaning towards measures in a 11mm thick... I'll be sure to wear a long sleeve shirt when I'm finally ready to try it on one day.
-
Trying things is good. If you read Hodinkee or other blogs and forums, you'll see a lot of comments along the lines of, "If only it was 38 mm, not 40 mm", or "I can't wear bigger than a 39 mm watch".
In my experience, you get used to different sizes pretty quickly, but it might look odd when you put something on for the first time. Provided the lugs don't extend past the edges of your wrist, you'll be fine, and the Hodinkee fans of small watches are wrong.
For example, I normally wear a Tender watch, which has a 36 mm diameter case.
But I could rock an Omega Ploprof, which is 48 mm, and definitely won't fit under shirt cuffs!
Weirdly, I never seem to get on with 39 mm pieces. No idea why!
The Bulgari is actually really comfortable, so going that thin isn't a problem.
-
-
Of the ones you've listed, I like the Steinhart best. It's slightly thinner than most other dive watches, since it uses the ETA 2892 movement instead of the more common 2824. I'm also a big fan of titanium cases.
For that reason, I'd also suggest a Dievas Vortex. They're easily available on the secondhand market, too. The leather strap is meh, so I would recommend swapping it with a decent nato at the first opportunity.
-
I much prefer the ceramic bezel to aluminum, and most divers I see still use aluminum (looking at you Tudor).
Seriously, there is no excuse for a watch company in that price bracket to still be using crappy aluminum bezels, especially when they have access to the Rolex parts bin.
-
You could get an Aquis new from Jomashop in your price range. I particularly like the PVD model on the orange strap.
No idea what the watches are like, but the Aquis Meistertaucher looks great. (Hodinkee review.)
