Watches - another OCD problem
-
The Black Bay (particularly in blue) is a great watch.
Strongly backed!
Regarding bracelet stretch, I don't have any tips. I take a more laissez faire approach to watch maintenance!
-
A quick Google reveals that bracelet stretch on stainless steel is down to wear. So one piece of advice was to clean it, for example with an ultrasonic cleaner.
http://www.wristtimes.com/blog-1/2014/5/18/ultrasonic-clearners-and-you
Or you could just get it repaired eventually.
http://www.wristtimes.com/blog-1/2014/6/6/michael-young-bracelet-magician
-
I have been talking about buying a dateless Sub for 4 years now but, never seem do get away from my Seiko
That's all one needs right there, IMO.
-
I've been using an ultrasonic cleaner on my watches and other things for a while now, you'd be amazed the stuff that comes off your glasses…shiver...
Just copped an ultrasonic cleaner online so I'm really curious to see what type of funky weirdness it manages to remove from my watch bracelet.
-
That's good news. These people just try it on and try to keep deposits.
Or strong-arm me into buying a watch from them in any case. Thanks for your support.
Still, it's sorted. Well, nearly. Now I've got to figure out what I'll buy instead…
If I was
sensibleboring then I'd get a Rolex, probably the Milgauss. The new METAS rated Omegas appeal. The Globe Master is something that could be dressy or casual, but I probably wouldn't be able to resist one of the new, titanium Ploprofs.
-
I've seen the Ploprof in steel a while back. It's far too big and clunky to be a practical choice. I love it.
The new model is attractive because it's antimagnetic, and I spend a lot of time around computers and other electronics. It probably isn't really an issue, but my old Breitling was never a good timekeeper, so…
-
Well done tmg. You'll treasure it for years.
-
Are magnets really that much of an issue? I leave my watches on top of electronic devices (computers, the cable box, my cell phone) and my watches stay within +/-2 a day.
I read some medical papers on it, EMR is a thing. I've never given it much thought/attention with watches, and can't imagine it's a huge deal, however, an antimagnetic case isn't going to hurt…It was one of the reason I went for the Ingenieur that I did... It runs about +/- 2secs a day as well ....
-
There aren't that many antimagnetic watches out there. Off the top of my head:
-
Some of the IWC Ingineur and Pilot watches.
-
Omega Master co-axial and chronometers.
-
Rolex Milgauss.
-
JLC Geophysic and Master Extreme Lab 2.
-
Breguet 7727. (It should be because it's got a magnetic pivot on the balance wheel.)
-
Panerai PAM 389.
-
Some of the Bremont watches.
The new Rolex 3255 calibre has some protection from it's design, but it's not as extreme as the Omega design.
The Grand Seiko quartz is amagnetic to a degree.
If you want to go vintage, then the IWC, JLC and Omega Mark XI are shielded. The IWC Ingenieur was historically antimagnetic, as was the Rolex Milgauss, Omega Railmaster (though not the newer models), original JLC Geophysic, and there was a Patek too.
-
