Grooming and Hygiene
-
I've been using double edge blades in a safety razor for years (better shave and save coin )
Last two years went to a straight razor . -
I've been using de and a shavette (didnt want to invest in honing stones and a strop till I knew it was for me) for awhile. The traditional kamisori is only one sided though, and requires a special technique to shave yourself with…..I may just look into the ground iwasaki, but was just interested in opinions on the traditional method, if anyone was going that route.
-
I have a kamisori and it's tricky to use . Here is my set up here in Japan.
Asahi can is for used blades .
-
Just thought I’d put this here:
My dad swears by this stuff… (for dry cracked hands)
http://www.badgerbalm.com/p-14-badger-balm-for-dry-cracked-hands.aspxAnd here’s some quality “man care”
http://www.badgerbalm.com/c-52-organic-mens-grooming-products.aspx -
Thanks jock, tricky is definitely one of the words I hear associated with it commonly. Will probably wait until I'm out in vancouver again and try to do some more research there, my searches on the Internet tend to find little info / arguements.
-
I've been using de and a shavette (didnt want to invest in honing stones and a strop till I knew it was for me) for awhile. The traditional kamisori is only one sided though, and requires a special technique to shave yourself with…..I may just look into the ground iwasaki, but was just interested in opinions on the traditional method, if anyone was going that route.
The straight razor route is a steep learning curve . I stuck with it and finally after some time,
got it right . I hear you on not wanting to go baboonbonkers on hones / strops . I was interested in that way
since years ago it was the only way to shave . It doesn't get more "manly" than dragging a super sharp
blade across your face , hard to go back to the plastic two bladed contracptions .Feel free to ask any questions , check out this site :
http://straightrazorplace.com/forum.php
Very helpful .
To start on the cheap go here :
Cheers
-
Thanks again man, the shavette does a fairly good job at replicating the straight razor feel from what I can gather, but I'd imagine the weight difference could switch up the feel a bit.
Will have to look around that whipped dog site more. It looks like there could be some good value finds on there.
-
DFC , whippeddog had what he called " poor mans straight razor kit " ( if memory is correct ).
How I got started …had a razor , leather strop and balsa wood strip with two sides . One a green paste , the other
red ...this was your hone . Email him and ask about that . -
Will do, thanks
-
JDL….can you show a photo of the gillette ? Assuming it is a DE blade model ?
Cheers
-
For those interested :
-
@4c:
Just thought I’d put this here:
My dad swears by this stuff… (for dry cracked hands)
http://www.badgerbalm.com/p-14-badger-balm-for-dry-cracked-hands.aspxAnd here’s some quality “man care”
http://www.badgerbalm.com/c-52-organic-mens-grooming-products.aspxThanks had a look and emailed them .
Cheers
-
JDL this bloke may sort you out :
http://shavenook.com/thread-custom-double-edge-razor-handles-by-akasl
His fbook ….
Or :
http://www.pensoftheforest.co.uk/shaving/shaving-razors-dehandles.html
What sort of brush and soap/cream do you use ?
Cheers
-
Still playing with soaps, brushes, and my routine. Have actually been looking through the thread trying to pick up ideas. I actually saw both links previously, and neither were quite what I want. Looking for something like these, but again unsure on quality and the longest I see is 3.875, though the diameter increase would likely solve some of my issue.
http://www.eliterazor.com/product-category/razors/razors-wood/
-
JDL ..the AKASL bloke may be able to custom make your handle to spec .
Give him a try . -
If you have the DIY skills and tools …why not . Just do it as a famous shoe trainer company preaches .
-
Taking a close look at AKASL stuff is kind of what is pushing me. His are little more than various threaded and compression fittings slipped together, which almost anyone could obtain the raw materials for a few bucks. Even looking at the general way the wood handles fit together, I am certain I have the skill for, the finish I am unsure on though. However my buddy puts in hardwood floors and does amazing finish work
