IHxB01xRAW Beatle Buster 18oz Raw Japanese Selvage Denim Indigo
-
@CLJ:
I think potential buyers are afraid of not being able to fit post soak measurements. You cant stretch jeans back out if you cant get in them. I would love to try 18oz. Would it be possible to sanforize this fabric? Forgive me lack of knowledge here.
Sorry, but sizing raw denim is no rocket science - if you buy them just a tad above your postwash waist, they will fit perfectly and be more forgiving in terms of stretch than sanforized models. At least that's my experience. Plus, the Shrink to fit part offers a nice nostalgic and exciting experience.
A possible solution could be to do one wash versions of each size to
a) sell them to those afraid of sizing
b) give true postwash measurements.
Regarding the inseams, I concur with the statements above. -
You can sanforize anything but I think this denim would lose a lot of appeal. I for one like the fact that this is real raw untreated denim off the loom. If you can't wrap your head around 'shrinks one in waist and two in length' stick with sanforized pairs…shrinkage in other measurements is minimal. I do agree that these are too short though. I have the vulcan sample pair (same 18oz denim) and I believe they came in at 34'' pre soak, about the same as these B01Raw. They are borderline too short for me post soak at around 32.5'' but still fit(I'm 5'11 and actually they fit pretty perfect just no stacks to speak of)... I don't need stacks on all my jeans, and I don't cuff jeans either but I would appreciate an extra 2-3'' for sure. Even if I just got it hemmed off
The Vulcans are great jeans, but again the short inseam stopped me from buying them. In my opinion Raw jeans with a 2 inch inseam shrinkage, should be at least 37, but 38-39 inches would be perfect.
My 666s i was able to stretch the inseam quite a lot, because of the loose weave. -
I now remember the issue with this batch, the factory made them to the dimensions of the 21oz version, they were made smaller all round and thus shorter than they should have been. they offered to remake them, but on the basis that they were just a little smaller than they should be, I decided to keep them as is…
This may be why I love my pair. When I tried the 21oz in the same size they just fit me wrong
-
but if they just continue 4 more inches from the hem which is now at 35"? I don't see that problem.
-
My only gripe regarding a super long inseam like 38-39 inches, you end up losing any amount of taper, when hemming, if your shorter….
I agree Mike.
I'm at work so i did a little calculation…...........with a calculator.
The approximately average taper from knee down is 0,7 inches (taken from 4 slim/loose IH models), so the difference will be about 0,1 inch, if you add another 3 inches to the inseam.
This is of course only if the narrowing in, is in a straight line from the knee and down.
I'll keep it as a secret how i did this complicated magic
-
-
how's my fit guys?
-
Post soak?.. If so and if not too tight in the thighs/ crotch, I'd say it's a perfect fit… Nice t-shirt as well...
ty. 2 warm soak to get my desired fit and length. fit superbly at all parts..
-
Then I can only say one thing: congrats on a glorious fit and enjoy the ride mate!..
thanks mate… just want to share my experience with 18oz RAW..
go tts.. you wont get any problem. mine is 29, and i am 167cm , 57kg. no hem or alter did. -
-
