IH-816 - 17oz Duck Work Pants

[derivative666]

^agreed

[MikeC]

Shoreman, the hem is not that small at all. These pants are a standard straight leg cut with a slight taper below the knee. I always need to hem about 3-4 inches off and it usually takes 0.3-0.4 off of the hem, making it wider.

[Seul]

@Shoreman:

So you guys are recommending that, if I have a 32" waist and typically wear a size 33 for comfort,  I should size down to a 31?

The 32 will fit perfectly from the getgo… 31 would work if you're a true 32 waist and want a slightly slimmer silhouette...

[ronaldlsh]

Gave these a try at TSS today.

Yay or Nay guys?

[Finn666]

why not? looks good to me…
this cut is perfect for us bigger boys Ron

[ronaldlsh]

They are now set aside for me as we speak.

[urbanwoodsman]

@Finn666:

why not? looks good to me…
this cut is perfect for us bigger boys Ron

Mine are getting tapered and hemmed. After I hem them to 31in(stack a bit), the hem measures 9.6in. Sorry, just way too big for me. So, I opted to get them tapered.

[Finn666]

^might do the same to mine. at least I'll let them hem and after that we'll see how much the l/o measures…

[Onairda]

Urbanwoodsman, who's doing the tapering in Manhattan?  Assuming your having it done there?

[urbanwoodsman]

@Onairda:

Urbanwoodsman, who's doing the tapering in Manhattan?  Assuming your having it done there?

Loren in Greenpoint, BK
Jean maker but he does repairs and tailoring.

[Onairda]

Hmmm Thanks.
Stanton St. Tailors destroyed a pair of pbj's on me so now i'm reluctant to have it done again.  Id love to see some pics of how your 816's  turned out.

[urbanwoodsman]

@Onairda:

Hmmm Thanks.
Stanton St. Tailors destroyed a pair of pbj's on me so now i'm reluctant to have it done again.  Id love to see some pics of how your 816's  turned out.

Will do. Should have them back Friday. You live in the city?

[Onairda]

Used to live in Brooklyn, now im over the line in CT.  I graduated from Pratt, so lived all over that area.

[xtcclassic]

These are tempting me but I'm resisting so far. What I couldn't possibly resist is a pair of these in the 21oz. superblack denim.

[Felix]

Hello,

to everyone I'm new to this forum and this is my first post.

I have a “Beatle Buster“ IhxB01 in size W34 which I really like. Now I'm thinking about buying a “17oz Japanese Cotton Duck Work Pants” IH-816 but not sure which size will fit me.

The Beatle Buster was a bit tight at the beginning, but after a few days it stretched and now it fits perfect.

The sizing table says the Beatle Buster has a 83.8” waist and the IH-816 has a 89.0“ waist (in size 34). But my beatle buster stretched to almost 89”. So should I take a size 34 or will the cotton stretch like the 21oz denim?

Regards
Felix

[Finn666]

i havent checked yet cuz I'm on the phone…what does the other measurements (thigh) say compared to your busters?
if it isn't that much of a difference I may would go for a 33 in your case, cuz the duck stretches as well!...

as a note:
the above is just a guess cuz I haven't looked at the measurement charts, so if anyone says sth. different it could also be true...
let me check the chart right quick!...

[Finn666]

yap i'd go for a 33 in these!…

[Felix]

@Finn666:

yap i'd go for a 33 in these!…

Thanks for the advise

[madmonday]

the hem done by IHUK:

love them as they are nice & relaxed.  when i want slimmer duckies i do my leftfield joints or 666s

will get you images in February or so Finn when I'm done with the little tour thing. apologies as i don't keep up like i should

[Finn666]

don't worry mickey…it's all good!