-
Congratulations. It looks like you finally got your pair. I know you have been looking for a while.
I got the BnBs in tag size 33 (34W). I gave them a hot soak at the beginning and they reacted almost exactly as predicted in the SE webpage. They lost about 0.5" in the waist and currently measure 34.5 inches. You should get a post-soak stretch of about an inch.
-
Hey lando, el, and rp with your guys' black and blues was there any stretching with ware? Curious since there so light and thin.
Yes. The waist has indeed stretched and the fabric is very thin. I will throw up some measurements on my pair of tagged W32's when I get a chance. Maybe even some evo flicks if the weather is nice. They have just gotten to the point where I don't think they will be acceptable attire for work.
-
Did everyone with the black n blues end up pre soaking them first?
I did. Didn't take pre or post measurements though.
-
BlacknBlues
After seeing Landos pair that had been worn in quite a bit with little effort I had to get a pair.
-
Black n Blues
About 5 wears.
-
damn uw, you can make that camera sing!
-
really nice pictures - makes me wish I had picked up a pair.
-
-
Nice video, Might have to get a pair one day. I thought "Cool hunters" were supposed to be ahead of trends though…
-
I missed these…. I wanna cry.
I just sold a pair of rs04 on eBay, while the construction was impeccable, I just wasn't feeling the denim in any way, Mabey it was just this run, but white oak must make denim that I like, I just haven't found it yet.
-
Roy's Jeans & The Cone Mills Video - Straight & Narrow Fits
Earlier this year we took a trip to Greensboro (North Carolina) with Roy Slaper to experience the production process of a new denim that was designed from the ground up by Roy himself. We took Kellen Dengler, our videographer from NYC, with us to shoot the process, we felt it wasn't fair to keep it under wraps. At the oldest denim mill in the world, this is the story of Roy's new fabric.
This video was shot in 1080p High Definition, it's best viewed in full-screen HD mode with the volume turned way up.http://vimeo.com/selfedge/selfedgeingreensboro
Roy is back with a restock of the release that sold out in seconds in March. This long overdue set of jeans is made up of a custom fabric from Cone Mills made exactly to Roy's specs. This is the first time in over three decades that Cone has produced a loomstate unsanforized fabric for anybody, and therefore we feel that this is history in the making.
The denim is a loomstate unsanforized indigo denim that clocks in at 14.5oz per square yard in it's raw state. The denim is made of American cotton and is 100% pure indigo dyed in the darkest shade Cone produces.
Technically, the construction of the denim.. the warp has multiple sized (engineered) slub yarns and the weft has large rough spun (non-engineered) yarn. It weighs 14.5 in loomstate and approximately 16.25oz after a hot water soak. Roy broke three of his key machines on this run and had to improve them to deal with the heavier denim.
The fabric hand is smooth and tight. Roy had Cone pack as many picks per inch (46 in 6.4 gauge yarn) as could be done without the loom blowing out and therefore achieved the tight weave he was after. There is a sound to the denim, after its been worn a few weeks - when you rustle it, that's somewhere between suede and oil cloth. This is tough fabric.
The look is streaky and it appears grey-ish at first. After rinsing and a few weeks of wear, it starts to change character as the white hairs formed by the fill yarns wear off leaving the streakiness to mellow and the shade to become a more rich, classic indigo.The jeans themselves come in two fits, both a slim and a straight leg. Both silhouettes are slightly modified from past iterations of Roy's straight and slim fits.
With the RS04 and RN04 a few changes have been made from past models. Never content with just "doing another run", Roy has improved and tweaked everything surrounding the production of these jeans. The stitching of the body is even finer and more accurate and we love the fully lined back pockets and coin pocket. The rear pocket hems now have a hand-done welt in them (slightly thicker than the last run), mimicking the vintage style belt-loops found on many of the best Japanese brands. Last but not least the back pockets have been slightly reduced in size from past versions.
Jeans from Roy don't come often and we can't keep them in stock as long as we'd like, so if you've been waiting for a pair, now is the time.
Both of these models will be released at noon (local time) on Saturday June 2nd at all three Self Edge stores. These will also be available via our online store at 10am (PDT) on June 2nd.
