Motorcycles
-
HJC are also in the Star Wars business. Here's Boba.
-
hmm i'm a huge iron man fan, like massive. so i'm kinda bias towards being tony stark..
-
hmm i'm a huge iron man fan, like massive. so i'm kinda bias towards being tony stark..
Same!
-
I have the big brother, the ZX10R Ninja and I can't fault it. 180 bhp [emoji83]
250R Ninja would be a great intro to the sports bike world imoSent from my iPhone using Tapatalk
@louisbosco most bikes over 600cc or so will do 0 - 60 mph (or 0 - 100 km/h) in three to four seconds. There's not a lot of difference between them, the sports bikes are quicker further up the speed range.
You'll probably find cars slow after recalibrating your brain.
well looks like i'm leaning towards getting the 250r ninja for now and see where i go from there..
-
I'm knocking around options for a fairing for my Thruxton. These are the three under consideration.
From top to bottom:
-
The stock Triumph part. It's expensive, but comes with a proper subframe, and can be fitted in a few hours. This is the easy option, and it integrates well with the bike, it's what's on the green Thruxton I posted yesterday.
-
The Rickman CR fairing. (Here's an original in situ.) It'll be more hassle to fit, and will need to be removed for servicing, but has a real seventies vibe, and sits well with the bike. I think that the scale might be slightly out in the picture, but it gives an idea.
-
The Rickman Avon fairing. I know someone who used to work for Triumph Australia, and he really likes this design. I'm not so sure, but BikeEXIF recently featured an MZ with one fitted, and it looks good. If I felt adventurous, there's a matching lower part.
A third party fairing looks like it'll be a pain to fit. There are a few brackets available, Airtech offer one, but they tend to be crude. I don't know how much it would cost to get a custom one fabricated, as I have neither the skills nor the tools to do that myself.
However, a non-standard fairing would give the bike a unique look. Take the Sage Rage Thruxton as an example…
Anyway, I'm still plotting. The Rickman CR is probably my favourite, but I'd need to figure out if it'll fit, how much it'll cost to attach it, and whether the lower parts would collide with my knees!
-
-
kinda like it without…. but if i had to pick, the first ones the best..
-
I sorta like the third. Though if we're taking other factors into consideration, rather than strictly aesthetics, I'd say get the stock fairing. It looks nearly as cool, and it's going to be less expensive and easier to install.
-
The Café Racer fairing from Triumph is about $1400 (AU) here, but $1000 if I ship it over from the UK, coming in under the threshold for paying import duty. I can probably fit it myself at a pinch, I've got the instructions on my laptop.
The Rickman fairings from Airtech Streamlining run about $250 to $300 (US), another $100 to $150 for the screens, and about $200 for their mounting bracket. So $600 (US), about $800 (AU), and I'd need to buy a few bits from the Triumph kit to fit it. Plus they need painting and drilling, which will require calling on a third party. It'll probably end up being quite a lot more.
I'm still thinking about it, and I'm away for the next six weeks, so will sort it out when I get back.
-
Triumph have been on a bit of a roll with their Modern Classics range. On Wednesday they added to the line with the Bonneville Bobber.
It looks like it's intended as a competitor to the Harley Sportster and Indian Scout, but is possibly a more capable bike than either. It's a shame there aren't twin discs up front, perhaps it'll be offered in the parts catalogue.
The Bonneville T100 is a Street Twin with a more retro style, and was announced at Intermot a few weeks ago. It's a pretty bike, and I spotted this one at Metropolis Motorcycles in London.
-
The Bike Shed opened up a café, shop, and venue in Shoreditch last year. Having been out of London for a while, I went to take a look at what was there. Here are some of the bikes on the floor, which I think might be for sale.
Auto Fabrica. I think that it's a Type 7.
Customised Street Twin.
Harley Chopper.
Honda Café Racer.
I'm not sure what this was.
Gladstone chopper.
-
Rev'it have been on a roll with their urban riding gear. This is the Tracer Overshirt, which is a Cordura / denim blend. There's thin armour in the elbows and shoulders, and a back protector can also be fitted. I was really impressed by it.
This is the Rokker Black Jacket. It's effectively a set of textiles disguised as denim. There's D3O armour in the elbows and shoulders, and a back protector.
-
Death Spray Custom do cool work, mostly motorcycle related.
-
I'm knocking around options for a fairing for my Thruxton. These are the three under consideration.
From top to bottom:
-
The stock Triumph part. It's expensive, but comes with a proper subframe, and can be fitted in a few hours. This is the easy option, and it integrates well with the bike, it's what's on the green Thruxton I posted yesterday.
-
The Rickman CR fairing. (Here's an original in situ.) It'll be more hassle to fit, and will need to be removed for servicing, but has a real seventies vibe, and sits well with the bike. I think that the scale might be slightly out in the picture, but it gives an idea.
-
The Rickman Avon fairing. I know someone who used to work for Triumph Australia, and he really likes this design. I'm not so sure, but BikeEXIF recently featured an MZ with one fitted, and it looks good. If I felt adventurous, there's a matching lower part.
A third party fairing looks like it'll be a pain to fit. There are a few brackets available, Airtech offer one, but they tend to be crude. I don't know how much it would cost to get a custom one fabricated, as I have neither the skills nor the tools to do that myself.
However, a non-standard fairing would give the bike a unique look. Take the Sage Rage Thruxton as an example…
Anyway, I'm still plotting. The Rickman CR is probably my favourite, but I'd need to figure out if it'll fit, how much it'll cost to attach it, and whether the lower parts would collide with my knees!
i like the first one. plus its easier to install
go for that
ps. you HAVE to install the tail tiddy kit asapNo, it's not a Bell, it's the new Hedon Heroine. It's not up on their website, but they've posted a few images to Facebook and Instagram.
i love my hedon hedonist
-
-
I like either of the top two options. I'm not a big fan of the Avon fairing. Now time to check the Hedon website.
-
Quick public service announcement: Get Geared have a pair of Doc Martens Garrick boots in stock, with a chunk off RRP. (£240, down from over £300) in a UK size 11 (US 12, EU 46).
Moto Legends have UK sizes 7, 9 and 10 in stock, and Sportsbike Shop have EU 43 and 45 at £170, which is a real steal.
They look rather like a pair of vintage Lewis Leathers boots, but with modern appointments (Sympatex lining, D3O armour), and seemed really nice. If they were my size, I'd have snagged them for myself.
-
Those are pretty slick. It's not my size either, but I may have to keep my eye out.
-
I'm currently organising a new set of motorcycle gear to deal with the Australian climate.
The standard recommendation for hot weather is to go for mesh gear, but according to this article from the Iron Butt magazine, that's a bad idea.
When the air gets warmer than skin temperature, around 34°C or 93°F, it'll start to heat the body, so you want to minimise airflow. That means keeping yourself covered, and avoiding mesh or perforated garments.
Mesh works well at slightly lower temperatures, but according to this thread at ADV Rider has a pretty narrow window where it's effective, somewhere between 29°C and 34°C, or 85°F and 93°F.
