Sorry… realizing now on the computer that the black door was a poor backdrop.

6'2" - got the XXXL for chest and shoulder measurements assuming layers underneath - perfect fit in this area. The body is a little long. The sleeves are super long. If wearing a long sleeve layer like the IHSH-68, the sleeves of the shirt hold back the sleeves of the SR from falling over my hands. If wearing only t-shirt, the sleeves hang down past my palms. I can't imagine wearing it with only a t-shirt underneath - but I cannot decide if I'd later regret this.

Can I expect some creases to shorten the sleeves with that quilted layer there? Would I be foolish to rely on the shirt underneath to keep the sleeves at bay? I wouldn't be able to fit in a XXL if they were available...

Standing on the balcony 24 hrs after getting wet. I gave them a hot soak followed by a hot wash cycle for the agitation (no detergent, no spin) and hung to dry. I did this because I am between two sizes and chose the larger.

Before / After (size 36)

Waist 38 / 37.1
F rise 11.7 / 11.5
B rise 16.2 / 15.8
Thigh 13.3 / 13
Knee 9.2 / 8.8
Opening 8.5 / 8.3
Inseam 35.75 / 35

Decided keep the jacket. I used the recommendations of @adam313 and the shrinkage info from @@the_bourbon_denim_guy to create my own shrinkage plan: I did a wash cycle on warm with a medium spin cycle, 5 minutes on medium heat in the dryer to warm it up, then put it on and crushed the arms as far up my arm as I could get them, then wore it like that for a half hour, occasionally flexing my arms in front of me to work the creases and stretch the P2P, then hung to dry.

The goal was to limit the shrinkage in the chest area but try to get a little out of the rest, the combined shoulder and arm shrinkage was satisfactory, the wet stretching increased the chest measurement to a better measurement for me:
                Before/After
Shoulders - 20.5 / 20
Length - 28.2 / 28
P2P - 25.0 / 25.3
Opening - 22.8 / 22.8
Sleeve - 29.5 / 29.2
Sleeve Opening - 5.3 / 5

Can anyone comment on the fit of the Waxed Wills? Did you size up from your normal SJ shirt or denim jacket size? I'm an XL in all their shirts/jackets so far but do not have ample room for layering anymore after washing in both the denim Ramblin' and the Sashiko Townes (I can fit an IH heavy flannel under them, but it's not incredibly comfortable). I know I won't be washing the Waxed Wills, just looking for advice. Thanks

IHSH-177 in an Anish Kapoor mirror sculpture at MASS MoCA

@sabergirl:

Really small changes in measurements. Can you really feel a difference?

The combination of shoulders and sleeve length lost, and Adam313's wet sleeve setting process, fixed the arms for me without affecting the chest. This was a follow up to his recommendations from a week ago. Yeah the measurement changes aren't too interesting, but I have them and someone may benefit from them.

@spitfiredealer It's just wetting and wearing to affect the fit. I really like the jacket and wanted to make it work.

Decided keep the jacket. I used the recommendations of @adam313 and the shrinkage info from @@the_bourbon_denim_guy to create my own shrinkage plan: I did a wash cycle on warm with a medium spin cycle, 5 minutes on medium heat in the dryer to warm it up, then put it on and crushed the arms as far up my arm as I could get them, then wore it like that for a half hour, occasionally flexing my arms in front of me to work the creases and stretch the P2P, then hung to dry.

The goal was to limit the shrinkage in the chest area but try to get a little out of the rest, the combined shoulder and arm shrinkage was satisfactory, the wet stretching increased the chest measurement to a better measurement for me:
                Before/After
Shoulders - 20.5 / 20
Length - 28.2 / 28
P2P - 25.0 / 25.3
Opening - 22.8 / 22.8
Sleeve - 29.5 / 29.2
Sleeve Opening - 5.3 / 5

My coworkers dressed as me for Halloween today (I'm third from left). Noteworthy things: mustaches, black rimmed safety glasses, cuffed jeans, free sports team shirts from Uline.com, far left is imitating UHF, second from right bought a $15 Wrangler shirt on Amazon.

I'm wearing 555-XHS, IHSH-177 with an L.C. King chorecoat.

IHSH-177 in the mirror at the deCordova Museum

@The_Bourbon_Denim_Guy has me second guessing my return now… haven't bought that label yet.

Another indigo herringbone workshirt like the IHSH-165 please.

@adam313:

In your case, from the pics, there will be creases all the way up, but those can be awesome and unique to your frame. Denim drapes differently on everyone and it's a signature pattern

Thanks Adam, I agree with all you just said, and I'm mulling it over. I think I may throw in the towel, I'm getting some long diagonal folds on the upper arms (visible on my left bicep region) that I just don't want to live with.

@The_Bourbon_Denim_Guy looks great in this jacket

To answer my own question: after trying on over a few different shirts, the answer is no, I definitely shouldn't be desperate enough to rely on the shirt underneath to hold back the sleeves.